Hi,
I have the following scenario on my network:
A dlink device (router/dchp) with a cisco 2950 connect directly to the 1st
port.
A box with CentOS (physical machine) lastest version and running inside a
VMware Workstation a CenOS too (virtualiazed).
My dlink is the gateway on 192.168.50.10.
Switch IP: 192.168.50.111
CentOS (physical machine) IP: 192.168.50.105
CentOS (VM) IP: 192.168.50.100
Im running the wizard (step 2) and I put a management, isolation and
registration interfaces:
192.168.50.1 MANAGEMENT
192.168.2.1 ISOLATION
192.168.3.1 REGISTRATION
192.168.50.10 GW
But this error always occur
*Error!* Interface eth0 has not been enabled. Should check server side logs
for details
Giving tail -f /usr/local/pf/packetfence.log says:
Show the same message above with ' Is the interface correct plugged in ? '
Any Ideas how could I solve this?
Tks
Marlon
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
