I connected to the switch and execute all steps. I put gateway on interfece
192.168.2.1 (registration), have this and isolation. What is the minimum
things should I do, to proof NAC enviroment, need to do this quickly. I
have a lot of config on the switch that I follow from device config guide
another time. Now I just see web page but does not show nothing , like a
new MAC.
I just need a basic config on Cisco Switch 2950 to perform and see on the
web interface one host going though the vlans, doing a proof of NAC
enviroment with packetfence.
2013/7/15 Francois Gaudreault <[email protected]>
> Number of network cards doesn't matter. The configurator should work
> with 1 or 2 or whatever...
>
> I am quite surprised that the OS sees the card, but not the
> configurator. I am lacking ideas here.
>
> On 2013-07-14 6:27 PM, Marlon Bastida wrote:
> > No (connected to the DLINK device). Another question should I have two
> > network card ? I use the same network card both for physical box and VM.
> >
> >
> > 2013/7/12 Francois Gaudreault <[email protected]
> > <mailto:[email protected]>>
> >
> > Hmm... ok.
> >
> > Is the interface actually connected to the switch when you run the
> > wizard?
> >
> > On 2013-07-11 11:34 PM, Marlon Bastida wrote:
> > > Francois,
> > >
> > > #ifconfig -a
> > >
> > > eth0 Link encap:Ethernet HWaddr 00:0C:29:06:D0:47
> > > inet addr:192.168.50.105 Bcast:192.168.50.255
> > > Mask:255.255.255.0
> > > inet6 addr: fe80::20c:29ff:fe06:d047/64 Scope:Link
> > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > > RX packets:810 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:665 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:1000
> > > RX bytes:77929 (76.1 KiB) TX bytes:676498 (660.6 KiB)
> > >
> > > eth0.2 Link encap:Ethernet HWaddr 00:0C:29:06:D0:47
> > > inet addr:192.168.2.1 Bcast:192.168.2.255
> > Mask:255.255.255.0
> > > inet6 addr: fe80::20c:29ff:fe06:d047/64 Scope:Link
> > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:0
> > > RX bytes:0 (0.0 b) TX bytes:468 (468.0 b)
> > >
> > > eth0.3 Link encap:Ethernet HWaddr 00:0C:29:06:D0:47
> > > inet addr:192.168.3.1 Bcast:192.168.3.255
> > Mask:255.255.255.0
> > > inet6 addr: fe80::20c:29ff:fe06:d047/64 Scope:Link
> > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:0
> > > RX bytes:0 (0.0 b) TX bytes:468 (468.0 b)
> > >
> > > lo Link encap:Local Loopback
> > > inet addr:127.0.0.1 Mask:255.0.0.0
> > > inet6 addr: ::1/128 Scope:Host
> > > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > > RX packets:30 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:0
> > > RX bytes:1704 (1.6 KiB) TX bytes:1704 (1.6 KiB)
> > >
> > > Created registration and isolation for testing and management is
> the
> > > eth0 interface.
> > >
> > > Tks,
> > > Marlon
> > >
> > > 2013/7/10 Francois Gaudreault <[email protected]
> > <mailto:[email protected]>
> > > <mailto:[email protected] <mailto:[email protected]
> >>>
> > >
> > > Do "ifconfig -a". What do you see?
> > >
> > > On 2013-07-09 9:32 PM, Marlon Bastida wrote:
> > > > Hi,
> > > >
> > > >
> > > > I have the following scenario on my network:
> > > >
> > > > A dlink device (router/dchp) with a cisco 2950 connect
> > directly
> > > to the
> > > > 1st port.
> > > >
> > > > A box with CentOS (physical machine) lastest version and
> > running
> > > > inside a VMware Workstation a CenOS too (virtualiazed).
> > > >
> > > >
> > > > My dlink is the gateway on 192.168.50.10
> > <tel:192.168.50.10> <tel:192.168.50.10 <tel:192.168.50.10>>.
> > > >
> > > > Switch IP: 192.168.50.111
> > > >
> > > > CentOS (physical machine) IP: 192.168.50.105
> > > >
> > > > CentOS (VM) IP: 192.168.50.100
> > > >
> > > > Im running the wizard (step 2) and I put a management,
> > isolation and
> > > > registration interfaces:
> > > >
> > > > 192.168.50.1 MANAGEMENT
> > > > 192.168.2.1 ISOLATION
> > > > 192.168.3.1 REGISTRATION
> > > >
> > > > 192.168.50.10 <tel:192.168.50.10> GW
> > > >
> > > > But this error always occur
> > > >
> > > > *Error!* Interface eth0 has not been enabled. Should check
> > > server side
> > > > logs for details
> > > >
> > > > Giving tail -f /usr/local/pf/packetfence.log says:
> > > >
> > > > Show the same message above with ' Is the interface correct
> > > plugged in
> > > > ? '
> > > >
> > > > Any Ideas how could I solve this?
> > > >
> > > > Tks
> > > > Marlon
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
> ------------------------------------------------------------------------------
> > > > See everything from the browser to the database with
> > AppDynamics
> > > > Get end-to-end visibility with application monitoring from
> > > AppDynamics
> > > > Isolate bottlenecks and diagnose root cause in seconds.
> > > > Start your free trial of AppDynamics Pro today!
> > > >
> > >
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> > > >
> > > >
> > > > _______________________________________________
> > > > PacketFence-users mailing list
> > > > [email protected]
> > <mailto:[email protected]>
> > > <mailto:[email protected]
> > <mailto:[email protected]>>
> > > >
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
> > >
> > >
> > > --
> > > Francois Gaudreault
> > > Architecte de Solution Cloud | Cloud Solutions Architect
> > > [email protected] <mailto:[email protected]>
> > <mailto:[email protected] <mailto:[email protected]>>
> > > 514-629-6775 <tel:514-629-6775> <tel:514-629-6775
> > <tel:514-629-6775>>
> > > - - -
> > > CloudOps
> > > 420 rue Guy
> > > Montréal QC H3J 1S6
> > > www.cloudops.com <http://www.cloudops.com> <
> http://www.cloudops.com>
> > > @CloudOps_
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------------
> > > See everything from the browser to the database with
> AppDynamics
> > > Get end-to-end visibility with application monitoring from
> > AppDynamics
> > > Isolate bottlenecks and diagnose root cause in seconds.
> > > Start your free trial of AppDynamics Pro today!
> > >
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> > > _______________________________________________
> > > PacketFence-users mailing list
> > > [email protected]
> > <mailto:[email protected]>
> > > <mailto:[email protected]
> > <mailto:[email protected]>>
> > > https://lists.sourceforge.net/lists/listinfo/packetfence-users
> > >
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------------
> > > See everything from the browser to the database with AppDynamics
> > > Get end-to-end visibility with application monitoring from
> > AppDynamics
> > > Isolate bottlenecks and diagnose root cause in seconds.
> > > Start your free trial of AppDynamics Pro today!
> > >
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> > >
> > >
> > > _______________________________________________
> > > PacketFence-users mailing list
> > > [email protected]
> > <mailto:[email protected]>
> > > https://lists.sourceforge.net/lists/listinfo/packetfence-users
> >
> >
> > --
> > Francois Gaudreault
> > Architecte de Solution Cloud | Cloud Solutions Architect
> > [email protected] <mailto:[email protected]>
> > 514-629-6775 <tel:514-629-6775>
> > - - -
> > CloudOps
> > 420 rue Guy
> > Montréal QC H3J 1S6
> > www.cloudops.com <http://www.cloudops.com>
> > @CloudOps_
> >
> >
> >
> ------------------------------------------------------------------------------
> > See everything from the browser to the database with AppDynamics
> > Get end-to-end visibility with application monitoring from
> AppDynamics
> > Isolate bottlenecks and diagnose root cause in seconds.
> > Start your free trial of AppDynamics Pro today!
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> > _______________________________________________
> > PacketFence-users mailing list
> > [email protected]
> > <mailto:[email protected]>
> > https://lists.sourceforge.net/lists/listinfo/packetfence-users
> >
> >
> >
> >
> >
> ------------------------------------------------------------------------------
> > See everything from the browser to the database with AppDynamics
> > Get end-to-end visibility with application monitoring from AppDynamics
> > Isolate bottlenecks and diagnose root cause in seconds.
> > Start your free trial of AppDynamics Pro today!
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> >
> >
> > _______________________________________________
> > PacketFence-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
> --
> Francois Gaudreault
> Architecte de Solution Cloud | Cloud Solutions Architect
> [email protected]
> 514-629-6775
> - - -
> CloudOps
> 420 rue Guy
> Montréal QC H3J 1S6
> www.cloudops.com
> @CloudOps_
>
>
>
> ------------------------------------------------------------------------------
> See everything from the browser to the database with AppDynamics
> Get end-to-end visibility with application monitoring from AppDynamics
> Isolate bottlenecks and diagnose root cause in seconds.
> Start your free trial of AppDynamics Pro today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
