Hi All,
I just setup a fresh CentOS for PacketFence in VM.
All the OS and PacketFence software are installed successful by following
the guide.
But I just can't open the configuration page -- 'https://
@ip_of_packetfence:1443/configurator.'
I can ping&SSH to the server without any problem.
What I've tried here:
1. restart&reinstall the package and OS
2. restart the httpd service
3. try to start packetfence, there is some error for missing configuration
Did anyone see this issue before?
Thanks,
Zlyzwy
On Thu, Jul 11, 2013 at 1:42 PM, William Zhou <[email protected]> wrote:
> Thanks for your reply..
>
> I am running Debian in VM Workstaion 9.0.
> If it's a problem about Debian, is there any workaround to solve this
> issue?
> Or can you recommend some other OS? Maybe Centos?
>
> Thanks,
> Zlyzwy
>
>
>
>
> On Thu, Jul 11, 2013 at 9:25 AM, Fletcher Haynes
> <[email protected]>wrote:
>
>> If you are using ESXi, you'll need to use the E1000 NIC, as opposed to
>> the VMXNET one, I think. Debian has issues with a command (I forget which)
>> used to tell if a nic is up when using that driver.
>>
>>
>> On Wed, Jul 10, 2013 at 6:09 PM, William Zhou <[email protected]> wrote:
>>
>>> Hi All,
>>>
>>> I am trying to setup a fresh Packetfence. There are some problems and I
>>> can't solve it..
>>> I google a lot but there is no information.
>>>
>>>
>>> My environment:
>>> OS: debian wheezy running in a VM machine;
>>> interfaces: two physical network cards bridge to vm;
>>> Packetfence version: latest version from website; installed by apt-get
>>>
>>> My purpose:
>>> One network interface is connecting to Internet and another is connecting
>>> to a AP. Packetfence will be the captive portal and I can manage it from
>>> web.
>>> Internet --> eth0(WAN)
>>> eht1--> AP --> Clients
>>>
>>> My setup steps:
>>> 1. install the debian and Packetfence
>>> 2. configure the two interfaces ip address
>>> 3. open the web configuration page and the error comes at step 2(Networks)
>>> Logical name IP Address Netmask Type
>>> OFF eth0 192.168.1.28 255.255.255.0 Management Add VLAN
>>> OFF eth1 192.168.0.1 255.255.255.0 Inline Add VLAN
>>> both two interfaces are OFF here, I can't enable them otherwise I got this
>>> error msg:
>>> "Error! Interface eth1 has not been enabled. Should check server side logs
>>> for details"
>>>
>>> I am sure both two interfaces are activing.Here is some configuration :
>>> /etc/network/interfaces
>>> # The loopback network interface
>>> auto lo
>>> iface lo inet loopback
>>> # The primary network interface
>>> allow-hotplug eth0
>>> iface eth0 inet dhcp
>>> # The secondary network interface
>>> auto eth1
>>> iface eth1 inet static
>>> address 192.168.0.1
>>> network 192.168.0.0
>>> netmask 255.255.255.0
>>> broadcast 192.168.0.255
>>> =======================================
>>> /etc/dhcp/dhcpd.conf
>>> option domain-name "zlyzwy.cn";
>>> option domain-name-servers 8.8.8.8, 192.168.0.1;
>>>
>>> default-lease-time 6000;
>>> max-lease-time 7200;
>>>
>>> subnet 192.168.0.0 netmask 255.255.255.0 {
>>> range 192.168.0.100 192.168.0.200;
>>> option routers 192.168.0.1;
>>> option broadcast-address 192.168.0.255;
>>> }
>>> =======================================
>>> /etc/default/isc-dhcp-server
>>> INTERFACES="eth1"
>>>
>>> ======================================
>>> root@PacketFence:~# ifconfig
>>> eth0 Link encap:Ethernet HWaddr 00:50:56:3f:d0:32
>>> inet addr:192.168.1.28 Bcast:192.168.1.255 Mask:255.255.255.0
>>> inet6 addr: fe80::250:56ff:fe3f:d032/64 Scope:Link
>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>> RX packets:292 errors:0 dropped:0 overruns:0 frame:0
>>> TX packets:274 errors:0 dropped:0 overruns:0 carrier:0
>>> collisions:0 txqueuelen:1000
>>> RX bytes:38099 (37.2 KiB) TX bytes:87850 (85.7 KiB)
>>> Interrupt:18 Base address:0x2024
>>>
>>> eth1 Link encap:Ethernet HWaddr 00:0c:29:1c:d0:ee
>>> inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
>>> inet6 addr: fe80::20c:29ff:fe1c:d0ee/64 Scope:Link
>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>> RX packets:12 errors:0 dropped:0 overruns:0 frame:0
>>> TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
>>> collisions:0 txqueuelen:1000
>>> RX bytes:4005 (3.9 KiB) TX bytes:648 (648.0 B)
>>> Interrupt:19 Base address:0x20a4
>>>
>>> lo Link encap:Local Loopback
>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>> inet6 addr: ::1/128 Scope:Host
>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>> RX packets:271 errors:0 dropped:0 overruns:0 frame:0
>>> TX packets:271 errors:0 dropped:0 overruns:0 carrier:0
>>> collisions:0 txqueuelen:0
>>> RX bytes:816944 (797.7 KiB) TX bytes:816944 (797.7 KiB)
>>>
>>> ============================================================
>>>
>>> If you need any additional information, please inform me..
>>> Thanks for any reply in advance..
>>>
>>> Zlyzwy
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> See everything from the browser to the database with AppDynamics
>>> Get end-to-end visibility with application monitoring from AppDynamics
>>> Isolate bottlenecks and diagnose root cause in seconds.
>>> Start your free trial of AppDynamics Pro today!
>>>
>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>>> _______________________________________________
>>> PacketFence-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>
>>>
>>
>>
>> --
>> Fletcher Haynes <[email protected]>
>> Systems Administrator/Network Services Consultant
>> Willamette Integrated Technology Services
>> Willamette University, Salem, OR
>> Phone: 503.370.6016
>>
>>
>> ------------------------------------------------------------------------------
>> See everything from the browser to the database with AppDynamics
>> Get end-to-end visibility with application monitoring from AppDynamics
>> Isolate bottlenecks and diagnose root cause in seconds.
>> Start your free trial of AppDynamics Pro today!
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>> _______________________________________________
>> PacketFence-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>>
>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
