I've tried a lot ways to 'activate' the NIC but there is no lucky.
I guess it might be the problem of Debian in VM. I will try CentOS....

Thanks a lot for your help::)

Zlyzwy


On Thu, Jul 11, 2013 at 10:09 PM, Fletcher Haynes <[email protected]>wrote:

> I believe if you disconnect and then reconnect the NIC while the VM is
> running through Workstation, Debian will then detect it. Or you could just
> switch to a different NIC (if this is indeed the problem). Our current 3.5
> PF install is running on RedHat, and works fine, so I imagine CentOS would
> work fine.
>
>
> On Wed, Jul 10, 2013 at 10:42 PM, William Zhou <[email protected]> wrote:
>
>> Thanks for your reply..
>>
>> I am running Debian in VM Workstaion 9.0.
>> If it's a problem about Debian, is there any workaround to solve this
>> issue?
>> Or can you recommend some other OS? Maybe Centos?
>>
>> Thanks,
>> Zlyzwy
>>
>>
>>
>>
>> On Thu, Jul 11, 2013 at 9:25 AM, Fletcher Haynes 
>> <[email protected]>wrote:
>>
>>> If you are using ESXi, you'll need to use the E1000 NIC, as opposed to
>>> the VMXNET one, I think. Debian has issues with a command (I forget which)
>>> used to tell if a nic is up when using that driver.
>>>
>>>
>>> On Wed, Jul 10, 2013 at 6:09 PM, William Zhou <[email protected]> wrote:
>>>
>>>> Hi All,
>>>>
>>>> I am trying to setup a fresh Packetfence. There are some problems and I 
>>>> can't solve it..
>>>> I google a lot but there is no information.
>>>>
>>>>
>>>> My environment:
>>>> OS: debian wheezy running in a VM machine;
>>>> interfaces: two physical network cards bridge to vm;
>>>> Packetfence version: latest version from website; installed by apt-get
>>>>
>>>> My purpose:
>>>> One network interface is connecting to Internet and another is connecting 
>>>> to a AP. Packetfence will be the captive portal and I can manage it from 
>>>> web.
>>>> Internet --> eth0(WAN)
>>>> eht1--> AP --> Clients
>>>>
>>>> My setup steps:
>>>> 1. install the debian and Packetfence
>>>> 2. configure the two interfaces ip address
>>>> 3. open the web configuration page and the error comes at step 2(Networks)
>>>>    Logical name    IP Address      Netmask Type
>>>>  OFF       eth0    192.168.1.28    255.255.255.0   Management      Add VLAN
>>>>  OFF       eth1    192.168.0.1     255.255.255.0   Inline  Add VLAN
>>>> both two interfaces are OFF here, I can't enable them otherwise I got this 
>>>> error msg:
>>>> "Error! Interface eth1 has not been enabled. Should check server side logs 
>>>> for details"
>>>>
>>>> I am sure both two interfaces are activing.Here is some configuration :
>>>> /etc/network/interfaces
>>>> # The loopback network interface
>>>> auto lo
>>>> iface lo inet loopback
>>>> # The primary network interface
>>>> allow-hotplug eth0
>>>> iface eth0 inet dhcp
>>>> # The secondary network interface
>>>> auto eth1
>>>> iface eth1 inet static
>>>> address 192.168.0.1
>>>> network 192.168.0.0
>>>> netmask 255.255.255.0
>>>> broadcast 192.168.0.255
>>>> =======================================
>>>> /etc/dhcp/dhcpd.conf
>>>> option domain-name "zlyzwy.cn";
>>>> option domain-name-servers 8.8.8.8, 192.168.0.1;
>>>>
>>>> default-lease-time 6000;
>>>> max-lease-time 7200;
>>>>
>>>> subnet 192.168.0.0 netmask 255.255.255.0 {
>>>>     range 192.168.0.100 192.168.0.200;
>>>>     option routers 192.168.0.1;
>>>>     option broadcast-address 192.168.0.255;
>>>> }
>>>> =======================================
>>>> /etc/default/isc-dhcp-server
>>>> INTERFACES="eth1"
>>>>
>>>> ======================================
>>>> root@PacketFence:~# ifconfig
>>>> eth0      Link encap:Ethernet  HWaddr 00:50:56:3f:d0:32
>>>>           inet addr:192.168.1.28  Bcast:192.168.1.255  Mask:255.255.255.0
>>>>           inet6 addr: fe80::250:56ff:fe3f:d032/64 Scope:Link
>>>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>>>           RX packets:292 errors:0 dropped:0 overruns:0 frame:0
>>>>           TX packets:274 errors:0 dropped:0 overruns:0 carrier:0
>>>>           collisions:0 txqueuelen:1000
>>>>           RX bytes:38099 (37.2 KiB)  TX bytes:87850 (85.7 KiB)
>>>>           Interrupt:18 Base address:0x2024
>>>>
>>>> eth1      Link encap:Ethernet  HWaddr 00:0c:29:1c:d0:ee
>>>>           inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
>>>>           inet6 addr: fe80::20c:29ff:fe1c:d0ee/64 Scope:Link
>>>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>>>           RX packets:12 errors:0 dropped:0 overruns:0 frame:0
>>>>           TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
>>>>           collisions:0 txqueuelen:1000
>>>>           RX bytes:4005 (3.9 KiB)  TX bytes:648 (648.0 B)
>>>>           Interrupt:19 Base address:0x20a4
>>>>
>>>> lo        Link encap:Local Loopback
>>>>           inet addr:127.0.0.1  Mask:255.0.0.0
>>>>           inet6 addr: ::1/128 Scope:Host
>>>>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>>>>           RX packets:271 errors:0 dropped:0 overruns:0 frame:0
>>>>           TX packets:271 errors:0 dropped:0 overruns:0 carrier:0
>>>>           collisions:0 txqueuelen:0
>>>>           RX bytes:816944 (797.7 KiB)  TX bytes:816944 (797.7 KiB)
>>>>
>>>> ============================================================
>>>>
>>>> If you need any additional information, please inform me..
>>>> Thanks for any reply in advance..
>>>>
>>>> Zlyzwy
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>> See everything from the browser to the database with AppDynamics
>>>> Get end-to-end visibility with application monitoring from AppDynamics
>>>> Isolate bottlenecks and diagnose root cause in seconds.
>>>> Start your free trial of AppDynamics Pro today!
>>>>
>>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>>>> _______________________________________________
>>>> PacketFence-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>>
>>>>
>>>
>>>
>>> --
>>> Fletcher Haynes <[email protected]>
>>>  Systems Administrator/Network Services Consultant
>>> Willamette Integrated Technology Services
>>> Willamette University, Salem, OR
>>> Phone: 503.370.6016
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> See everything from the browser to the database with AppDynamics
>>> Get end-to-end visibility with application monitoring from AppDynamics
>>> Isolate bottlenecks and diagnose root cause in seconds.
>>> Start your free trial of AppDynamics Pro today!
>>>
>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>>> _______________________________________________
>>> PacketFence-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>
>>>
>>
>>
>> ------------------------------------------------------------------------------
>> See everything from the browser to the database with AppDynamics
>> Get end-to-end visibility with application monitoring from AppDynamics
>> Isolate bottlenecks and diagnose root cause in seconds.
>> Start your free trial of AppDynamics Pro today!
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>> _______________________________________________
>> PacketFence-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>>
>
>
> --
> Fletcher Haynes <[email protected]>
> Systems Administrator/Network Services Consultant
> Willamette Integrated Technology Services
> Willamette University, Salem, OR
> Phone: 503.370.6016
>
>
> ------------------------------------------------------------------------------
> See everything from the browser to the database with AppDynamics
> Get end-to-end visibility with application monitoring from AppDynamics
> Isolate bottlenecks and diagnose root cause in seconds.
> Start your free trial of AppDynamics Pro today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to