Hi Zlyzwy,
do you mean https://ip:1443/configurator instead ?
Regards
Fabrice
Le 2013-07-13 21:35, William Zhou a écrit :
Hi,
Thanks for tips.
I start the httpd.admin process by hand and I could see the web page
again.
There comes another issue, I open https://ip:1443 and it always
redirect to https:ip:1443/configurator/.
I tired different PC and browser, it doesn't make change.
Thanks,
Zlyzwy
On Sun, Jul 14, 2013 at 12:10 AM, Fabrice Durand <[email protected]
<mailto:[email protected]>> wrote:
Hi
http://sourceforge.net/mailarchive/forum.php?thread_name=1373633549.16785.YahooMailNeo%40web164502.mail.gq1.yahoo.com&forum_name=packetfence-users
Fabrice
Le 2013-07-13 10:17, William Zhou a écrit :
Hi All,
I just tried ZEN-Desktop, it seems I can setup the PacketFence
through web.
After I finished the 6-step configuration, I was unable to access
the web page again.
There is no error when I start the Packetfence.
Here is my conf file:
====================================================================
/usr/local/pf/conf/pf.conf
[general]
#
# general.domain
#
# Domain name of PacketFence system.
domain=zlyzwy.cn <http://zlyzwy.cn>
#
# general.hostname
#
# Hostname of PacketFence system. This is concatenated with the
domain in Apache rewriting rules and therefore must be resolvable
by clients.
hostname=PacketFence
#
# general.dhcpservers
#
# Comma-delimited list of DHCP servers. Passthroughs are created
to allow DHCP transactions from even "trapped" nodes.
dhcpservers=192.168.0.1
[alerting]
#
# alerting.emailaddr
#
# Email address to which notifications of rogue DHCP servers,
violations with an action of "email", or any other
# PacketFence-related message goes to.
[email protected] <mailto:[email protected]>
[database]
#
# database.pass
#
# Password for the mysql database used by PacketFence.
pass=xxxxxxx
[interface eth0]
ip=192.168.1.28
type=management
mask=255.255.255.0
[interface eth1]
enforcement=inline
ip=192.168.0.1
gateway=192.168.0.1
type=internal
mask=255.255.255.0
=====================================================================
/usr/local/pf/conf/dhcpd.conf
# dhcpd configuration
# This file is manipulated on PacketFence's startup before being
given to dhcpd
authoritative;
ddns-update-style none;
ignore client-updates;
%%networks%%
subnet 192.168.0.0 netmask 255.255.255.0 {
option routers 192.168.0.1;
option subnet-mask 255.255.255.0;
option nis-domain "zlyzwy.cn
<http://zlyzwy.cn>";
option domain-name "zlyzwy.cn
<http://zlyzwy.cn>";
option domain-name-servers 8.8.8.8;
option time-offset -18000; # Eastern Standard Time
range dynamic-bootp 192.168.0.100 192.168.0.200;
default-lease-time 21600;
max-lease-time 43200;
}
======================================================================
/usr/local/pf/conf/networks.conf
[192.168.0.0]
dns=8.8.8.8
dhcp_start=192.168.0.100
gateway=192.168.0.1
domain-name=inline.zlyzwy.cn <http://inline.zlyzwy.cn>
named=enabled
dhcp_max_lease_time=86400
dhcpd=enabled
type=inline
netmask=255.255.255.0
dhcp_end=192.168.0.246
dhcp_default_lease_time=86400
=====================================================================
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:4F:63:94
inet addr:192.168.1.28 Bcast:192.168.1.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe4f:6394/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1417020 errors:0 dropped:0 overruns:0 frame:0
TX packets:41193 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1147470612 (1.0 GiB) TX bytes:3176415 (3.0 MiB)
eth1 Link encap:Ethernet HWaddr 00:0C:29:4F:63:9E
inet addr:192.168.0.1 Bcast:192.168.0.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe4f:639e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:145 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:6570 (6.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:152 errors:0 dropped:0 overruns:0 frame:0
TX packets:152 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11497 (11.2 KiB) TX bytes:11497 (11.2 KiB)
===================================================================
[root@PacketFence ~]# service packetfence start
Starting PacketFence...httpd.admin|already running
Checking configuration sanity...
service|command
config files|start
iptables|start
named|already running
dhcpd|already running
snort|start
suricata|start
radiusd|already running
httpd.webservices|already running
httpd.portal|already running
snmptrapd|already running
pfdetect|start
pfsetvlan|already running
pfdhcplistener|already running
pfmon|already running
=======================================================================
Thanks
Zlyzwy
On Sat, Jul 13, 2013 at 8:15 PM, William Zhou <[email protected]
<mailto:[email protected]>> wrote:
Thanks for your reply.
I don't think it's about the firewall because I can access
the PF by SSH.
But I did try, it doesn't change anything.
I just update to latest version of PF but it doesn't change
anything .....
If anyone had some idea on this issue,, Please help me....
Thanks
Zlyzwy
On Sat, Jul 13, 2013 at 3:42 AM, forbmsyn <[email protected]
<mailto:[email protected]>> wrote:
Did you check the firewall (iptables)?
In my case I always run the following command after PF
reboot. I have not idea how to manage iptables from PF
yet so I just simply allow everything from my network to
PF. 192.168.10.0/24 <http://192.168.10.0/24> is my network.
iptables -A INPUT -s 192.168.10.0/24
<http://192.168.10.0/24> -i eth0 -j ACCEPT
Good luck!
Regards,
Jacky
On Fri, Jul 12, 2013 at 12:55 PM, William Zhou
<[email protected] <mailto:[email protected]>> wrote:
Hi All,
I've tried a lot in Debian, however there is no
success. So I am going to move the OS to Centos.
I just setup a fresh CentOS for PacketFence in VM
Workstaion 9.
All the OS and PacketFence software are installed
successful by following the guide.
But I just can't open the configuration page --
'https://@ip_of_packetfence:1443/configurator.'
I can ping&SSH to the server without any problem.
What I've tried here:
1. restart&reinstall the package and OS
2. restart the httpd service
3. try to start packetfence, there is some error for
missing configuration
Did anyone see this issue before?
Thanks again for any help...
Zlyzwy
------------------------------------------------------------------------------
See everything from the browser to the database with
AppDynamics
Get end-to-end visibility with application monitoring
from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
See everything from the browser to the database with
AppDynamics
Get end-to-end visibility with application monitoring
from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
