Thanks for your info. I came up with a work around to not use the conditions. Now I am just creating additional external sources for e-mail and SMS for each captive portal I create. So far it is working good for us.
Jeremy -----Original Message----- From: Loick Pelet [mailto:[email protected]] Sent: Friday, February 28, 2014 6:20 PM To: [email protected] Subject: Re: [PacketFence-users] Email source condition issue Hello Jeremy, Verify that your SSID is well send to PacketFence. You can run under pf user : radiusd -d /usr/local/pf/raddb -X, look at the called-id-station or the calling-id-station attributes to see if there is your SSID added to the mac address. I could be in another special attribute. You can also grep in packetfence.log if you find anything like "can't extract SSID" (or something like that). What kind of WiFI equipment are you running? regards, Loick On Fri, Feb 28, 2014 at 05:44:54PM +0000, Jeremy Plumley wrote: > Hello, > > Been working on getting self-registration to work on 4.1.0. I am trying to > modify the source "email" with a condition but I just get an error that you > have reached the maximum number of devices for username on the portal page. > Once I remove the condition all works fine. We plan on having multiple SSID's > do self-registration and each SSID get dropped into a different vlan. Trying > to use conditions with SSID equals to accomplish this. Any assistance would > be greatly appreciated. > > >From authentication.conf > > [email] > description=Email-based registration > email_activation_timeout=10m > type=Email > allow_localdomain=yes > > [email rule Multimedia_Guest] > description=Guest Access > match=any > action0=set_role=Student > action1=set_access_duration=1D > condition0=SSID,equals,<ssid> > > >From packetfence.log > > WARN: No role specified or found for pid > [email protected]<mailto:[email protected]> (MAC 00:21:5c:93:3d:7b); > assume maximum number of registered nodes is reached > (pf::node::is_max_reg_nodes_reached) > > Jeremy Plumley > ITS Network Technician > Guilford Technical Community College, > www.GTCC.edu<http://www.gtcc.edu/> > 601 High Point Road, Jamestown, NC 27282 Office - 336.334.4822 ext > 50428 > 1 John 1:9 ~ If we confess our sins, he is faithful and just to forgive us > our sins, and to cleanse us from all unrighteousness. > > ---------------------------------------------------------------------- > -------- Flow-based real-time traffic analytics software. Cisco > certified tool. > Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer > Customize your own dashboards, set traffic alerts and generate reports. > Network behavioral analysis & security monitoring. All-in-one tool. > http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg. > clktrk > _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users -- [email protected] :: +1.514.447.4918 (x130) :: www.inverse.ca<http://www.inverse.ca/> Inverse inc. :: Leaders behind SOGo (www.sogo.nu<http://www.sogo.nu/>) and PacketFence +(www.packetfence.org<http://www.packetfence.org/>) gtalk or skype : lpelet.inverse ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users ------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
