Dear PacketFence users, I'm very new to the PacketFence environment, and before going further with my investigation, I would like to know if what I want to know is possible.
Basically, I have a Network on which MAC authentication is enabled on the switches (Brocade ICX). We would like to be able to managed the different MAC addresses and assign them dynamically to some VLANs. There is no need for an isolation VLAN or not even a registration VLAN. I would like to have my PacketFence installed with only one Interface on which I could do the management and be able to enter new MAC addresses and define in which VLAN they will be. The VLAN assignment should be in the Radius reply to the switch according to RFC 3580 (Tunnel-Type, Tunnel-Medium-Type, Tunnel-Private-Group-ID). Many thanks for your Feedback. Laurent -- Laurent Bourqui, Solutions Architect - [email protected] BNC - Business Network Communication AG - http://www.bnc.ch/ Grubenstrasse 7b, CH-3322 Urtenen-Schönbühl tel: +41 31 858 58 58 / fax: +41 31 858 58 50 ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
