Hello Laurent,

yes it's possible to have this setup in packetfence.
But when you configure packetfence by the configurator you must create a 
reg and isol interface (these will be never used)

So the next steps are:
- create all the roles you need (Staff, Student, VIP ...)
- add the switch in packetfence (ip, radius secret, ...) and assign the 
correct vlan id to each role (role by vlan id only) and assign -1 for 
reg and isol role (it will reject connection for unknow devices).

Then create all the node (mac address) in packetfence and assign them a 
role, and reg them.

That's all.

Regards
Fabrice


Le 2015-03-26 07:02, Laurent Bourqui a écrit :
> Dear PacketFence users,
>
> I'm very new to the PacketFence environment, and before going further with my 
> investigation, I would like to know if what I want to know is possible.
>
> Basically, I have a Network on which MAC authentication is enabled on the 
> switches (Brocade ICX). We would like to be able to managed the different MAC 
> addresses and assign them dynamically to some VLANs. There is no need for an 
> isolation VLAN or not even a registration VLAN. I would like to have my 
> PacketFence installed with only one Interface on which I could do the 
> management and be able to enter new MAC addresses and define in which VLAN 
> they will be.
>
> The VLAN assignment should be in the Radius reply to the switch according to 
> RFC 3580 (Tunnel-Type, Tunnel-Medium-Type, Tunnel-Private-Group-ID).
>
> Many thanks for your Feedback.
> Laurent
>


------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to