Hi Minh,
keep stuff simple for now and keep layer 2 reg and isol vlan so you
don't need ip helper.
You already created a reg (210) and isol (220) vlan so these 2 vlan must
be available on lan switches and core switches.
Your goal now is to be able to have an ip address when your device is on
the reg vlan, so let's configure a static switch port on the vlan 210 ,
plug the device and check if you have an ip (provided by packetfence dhcp
server).
On the pf side let's do a:
ps -edf|grep dhcp
you will see the dhcpd process running on the reg and isol interface so
it mean that the dhcp server is running.
Don't forget to check packetfence.log and pfdhcplistener.log and check
if the mac address of the device appear.
Then if you are able to hit the portal the next step is to add switches
in pf config and configure swicthes to be managed by pf.
Regards
Fabrice
Le 2015-03-27 11:34, Trung minh a écrit :
Hello Fabrice,
With network diagram as my first posted, do i need to create vlan reg and iso
or other vlan on Lan switches and Core switches?
Which case i should use ip helper to point to pf?
Best regards,
-----Original Message-----
From: "Durand fabrice" <[email protected]> <[email protected]>
Sent: 3/26/2015 10:37 PM
To: "[email protected]" <[email protected]>
<[email protected]> <[email protected]>
Subject: Re: [PacketFence-users] Apply to Vlan
Hi Minh,
If you already created a reg and isol interfaces then the dhcp will be enabled
by default.
Just plug a device on the vlan 210 to see if you have an ip address from pf and
if you are able to hit the portal.
FYI new version of Openvas are not supported yet in pf (we are currently
working on it).
Regards
Fabrice
Le 2015-03-26 10:46, Minh Trung a écrit :
Hello Fabrice,
It seem be working fine after used (mysql -u root -p pf -v <
/usr/local/pf/db/upgrade-4.6.0-4.7.0.sql). But i think i installed PF from
refresh so it included packet.
So, what's next steps i have to do to supply DHCP for users which are Vlan
210, and 220?
How to scan clients by Openvas(I installed openvas already).
Any guide steps to make a network perfect with PF support is very
appreciated,
Best regards,
On 23 March 2015 at 09:17, Durand fabrice <[email protected]>
<[email protected]> wrote:
Hi Minh,
you have to update the schema because you have already updated packetfence
so
follow:https://github.com/inverse-inc/packetfence/blob/stable/UPGRADE.asciidoc#upgrading-from-a-version-prior-to-470
( mysql -u root -p pf -v < /usr/local/pf/db/upgrade-4.6.0-4.7.0.sql)
Regards
Fabrice
Le 2015-03-22 21:34, Minh Trung a écrit :
Hello Fabrice,
Here is the log that i had try to upgrade:
*[root@vmvnnetsec01 ~]# yum update packetfence
--enablerepo=packetfenceLoaded plugins: fastestmirror, securitySetting up
Update ProcessLoading mirror speeds from cached hostfile * atomic:mir01.syntis.net <http://mir01.syntis.net> <http://mir01.syntis.net>
<http://mir01.syntis.net> <http://mir01.syntis.net> * base: mirrors.fibo.vn<http://mirrors.fibo.vn> <http://mirrors.fibo.vn>
<http://mirrors.fibo.vn> <http://mirrors.fibo.vn> * epel: ftp.cuhk.edu.hk <http://ftp.cuhk.edu.hk> <http://ftp.cuhk.edu.hk>
<http://ftp.cuhk.edu.hk> <http://ftp.cuhk.edu.hk> *
extras: mirrors.fibo.vn <http://mirrors.fibo.vn> <http://mirrors.fibo.vn> <http://mirrors.fibo.vn> <http://mirrors.fibo.vn> *
rpmforge:mirrors.neterra.net <http://mirrors.neterra.net> <http://mirrors.neterra.net> <http://mirrors.neterra.net>
<http://mirrors.neterra.net> * updates: mirrors.fibo.vn<http://mirrors.fibo.vn> <http://mirrors.fibo.vn>
<http://mirrors.fibo.vn> <http://mirrors.fibo.vn>No Packages marked for Update*
Any recommended is appreciated,
Regards,
On 22 March 2015 at 02:12, Durand fabrice <[email protected]> <[email protected]>
<[email protected]> <[email protected]> wrote:
Hi Minh,
you are not trying to update the schema but to create a new one.
Just follow these steps
:https://github.com/inverse-inc/packetfence/blob/stable/UPGRADE.asciidoc
Regards
Fabrice
Le 2015-03-20 21:59, Minh Trung a écrit :
Hello Fabrice,
I tried but still same error.
Here is the log that i upgrade mysql schema:
*[root@vmvnnetsec01 pf]# mysql -u root -p pf -v <
db/pf-schema-4.7.0.sqlEnter password:--------------CREATE TABLE class (
vid int(11) NOT NULL, description varchar(255) NOT NULL default "none",
auto_enable char(1) NOT NULL default "Y", max_enables int(11) NOT NULL
default 0, grace_period int(11) NOT NULL, window varchar(255) NOT NULL
default 0, vclose int(11), priority int(11) NOT NULL, template
varchar(255), max_enable_url varchar(255), redirect_url varchar(255),
button_text varchar(255), enabled char(1) NOT NULL default "N", vlan
varchar(255), target_category varchar(255), delay_by int(11) NOT NULL
default 0, PRIMARY KEY (vid)) ENGINE=InnoDB--------------
ERROR 1050
(42S01) at line 5: Table 'class' already exists*
- All on my PF is refresh installed with version 4.7.0 on Cents 6.6.
Please take a look switch config that i attached, do i misconfiguration
something on these?
Any help is appreciated,
Regards,
On 20 March 2015 at 17:17, Fabrice Durand <[email protected]> <[email protected]> <[email protected]>
<[email protected]> <[email protected]> <[email protected]> <[email protected]>
<[email protected]> wrote:
Hello Minh,
You have to update the mysql schema.
Take a look at the upgrade file.
Regards
Fabrice
Le 20 mars 2015 05:21:00 GMT-04:00, Minh Trung <[email protected]> <[email protected]>
<[email protected]> <[email protected]> <[email protected]> <[email protected]>
<[email protected]> <[email protected]> a
écrit :
Hello Fabrice,
I did as you recommended but error appeared while i don't know how to
resolved.
These are some errors related that i look on radius.log and
packetfence.log
*#packetfence.log:*
*Mar 20 15:53:45 httpd.aaa(6337) INFO: [2c:27:d7:c3:c0:08] handling
radius autz request: from switch_ip => (10.126.123.10), connection_type =>
WIRED_MAC_AUTH,switch_mac => (Unknown), mac => [2c:27:d7:c3:c0:08], port =>
10001, username => "2c27d7c3c008" (pf::radius::authorize)Mar 20 15:53:45
httpd.aaa(6337) WARN: database query failed with: Unknown column
'machine_account' in 'field list' (errno: 1054), will try again
(pf::db::db_query_execute)Mar 20 15:53:45 httpd.aaa(6337) WARN: database
query failed with: Unknown column 'machine_account' in 'field list' (errno:
1054), will try again (pf::db::db_query_execute)Mar 20 15:53:45
httpd.aaa(6337) WARN: database query failed with: Unknown column
'machine_account' in 'field list' (errno: 1054), will try again
(pf::db::db_query_execute)Mar 20 15:53:45 httpd.aaa(6337) ERROR: Database
issue: We tried 3 times to serve query node_attributes_with_fingerprint_sql
called from pf::node::node_attributes_with_fingerprint and we failed. Is
the database running? (pf::db::db_query_execute)Mar 20 15:53:45
httpd.aaa(6337) ERROR: radius authorize failed with error: Can't use string
("0") as a HASH ref while "strict refs" in use at
/usr/local/pf/lib/pf/Switch.pm line 1562. (pf::api::radius_authorize)*
*#radius.log:*
*Fri Mar 20 15:53:45 2015 : Auth: Login OK: [2c27d7c3c008] (from client
10.126.123.10 port 50001 cli 2C-27-D7-C3-C0-08)Fri Mar 20 15:53:45 2015 :
Error: rlm_perl: No or invalid reply in RPC communication with server.
Check server side logs for details.*
*Here is the switch.conf:*
*## Copyright (C) 2005-2015 Inverse inc.## See the enclosed file COPYING
for license information (GPL).# If you did not receive this file,
see#http://www.fsf.org/licensing/licenses/gpl.html<http://www.fsf.org/licensing/licenses/gpl.html>
<http://www.fsf.org/licensing/licenses/gpl.html> <http://www.fsf.org/licensing/licenses/gpl.html>
<http://www.fsf.org/licensing/licenses/gpl.html> <http://www.fsf.org/licensing/licenses/gpl.html>
<http://www.fsf.org/licensing/licenses/gpl.html> <http://www.fsf.org/licensing/licenses/gpl.html>
<http://www.fsf.org/licensing/licenses/gpl.html>[default]description=Switches
Default
Valuesvlans=1,2,3,4,5normalVlan=1registrationVlan=2isolationVlan=3macDetectionVlan=4voiceVlan=5inlineVlan=6inlineTrigger=normalRole=normalregistrationRole=registrationisolationRole=isolationmacDetectionRole=macDetectionvoiceRole=voiceinlineRole=inlineVoIPEnabled=noVlanMap=YRoleMap=Ymode=testingmacSearchesMaxNb=30macSearchesSleepInterval=2uplink=dynamic##
Command Line Interface ## cliTransport could be: Telnet, SSH or
SerialcliTransport=TelnetcliUser=cliPwd=cliEnablePwd=## SNMP section##
PacketFence ->
SwitchSNMPVersion=1SNMPCommunityRead=publicSNMPCommunityWrite=private#SNMPEngineID
= 0000000000000#SNMPUserNameRead = readUser#SNMPAuthProtocolRead =
MD5#SNMPAuthPasswordRead = authpwdread#SNMPPrivProtocolRead = DES
#SNMPPrivPasswordRead = privpwdread#SNMPUserNameWrite =
writeUser#SNMPAuthProtocolWrite = MD5#SNMPAuthPasswordWrite =
authpwdwrite#SNMPPrivProtocolWrite = DES #SNMPPrivPasswordWrite =
privpwdwrite# Switch ->
PacketFenceSNMPVersionTrap=1SNMPCommunityTrap=public#SNMPAuthProtocolTrap =
MD5#SNMPAuthPasswordTrap = authpwdread#SNMPPrivProtocolTrap =
DES#SNMPPrivPasswordTrap = privpwdread## Web Services Interface ##
wsTransport could be: http or httpswsTransport=httpwsUser=wsPwd=## RADIUS
NAS Client config## RADIUS shared secret with
switchradiusSecret=[10.126.123.10]RoleMap=Nmode=productionSNMPCommunityRead=kvpguestVlan=230SNMPCommunityWrite=kvpacliUser=minhdefaultVlan=123AccessListMap=Ndescription=KVP_R4_OA2type=Cisco::Catalyst_2960cliPwd=xxxxxVoIPEnabled=YisolationVlan=220radiusSecret=xxxxxxuplink_dynamic=0SNMPVersion=2ccliEnablePwd=xxxxxuplink=1001registrationVlan=210voiceVlan=124*
*#pf.conf*
*[general]## general.domain## Domain name of PacketFence
system.domain=KVP.global## general.hostname## Hostname of PacketFence
system. This is concatenated with the domain in Apache rewriting rules and
therefore must be resolvable by clients.hostname=vmvnnetsec01##
general.dhcpservers## Comma-delimited list of DHCP servers. Passthroughs
are created to allow DHCP transactions from even "trapped"
nodes.dhcpservers=127.0.0.1,10.126.122.11,10.126.122.12##
general.timezone## System's timezone in string format. Supported
list:#http://www.php.net/manual/en/timezones.php<http://www.php.net/manual/en/timezones.php>
<http://www.php.net/manual/en/timezones.php> <http://www.php.net/manual/en/timezones.php>
<http://www.php.net/manual/en/timezones.php> <http://www.php.net/manual/en/timezones.php>
<http://www.php.net/manual/en/timezones.php> <http://www.php.net/manual/en/timezones.php>
<http://www.php.net/manual/en/timezones.php>timezone=Asia/Ho_Chi_Minh[alerting]##
alerting.emailaddr## Email address to which notifications of rogue DHCP
servers, violations with an action of "email", or any other #
PacketFence-related message goes [email protected][scan]##
scan.engine## Which scan engine to use to perform client-side policy
compliance.engine=openvas[database]## database.pass## Password for the
mysql database used by PacketFence.pass=xxxxx[interface
eth0]ip=10.126.122.27type=managementmask=255.255.255.0[interface
eth0.210]enforcement=vlanip=10.126.210.1type=internalmask=255.255.255.0[interface
eth0.220]enforcement=vlanip=10.126.220.1type=internalmask=255.255.255.0*
If i can provide you more information to solved this issue please let me
know.
Thank and Best regards,
On 17 March 2015 at 08:59, Durand fabrice <[email protected]> <[email protected]> <[email protected]>
<[email protected]> <[email protected]> <[email protected]> <[email protected]>
<[email protected]> wrote:
Hello Minh,
Le 2015-03-16 05:20, Minh Trung a écrit :
Hello Fabrice,
Thank you for your quick responded,
My LAN Cisco switches 2960 are almost using Version 12.2(44)SE6, does this
version enough condition to MAB configured?
And Core switches are 4500 model, Version 12.2(50)SG3.
2960 and 4500 support MAB but i don't have in mind which ios version
exactly support it (google it)
I did as you recommended but after configuration radius on switch then i
can not log in to switch again, it asked Username, while i don't know that
:( .
you probably changed:
aaa authentication login default local
How to use AD accounts to authenticate all users on Vlan123?(I own DNS, AD,
DHCP on windows server).
You have 2 options:
use mac-authentication and hit the portal to authenticate (create a AD
authentication source in packetfence)
use 802.1x authentication (you must join the windows domain) and
autoregister 802.1x users
In the 2 case create a portal profile and include the AD source you
created.
I also want to create a Vlan for guests with name Guest but can not change
type on web UI. This Vlan use for only guests when they come to work and
don't have account on our AD. Which is better method, condition, rules that
i have to look?
Register by email or by sms is the better choice i think.
I hope you can explain more detail about Radius, using AD to authenticate
to me more clearly.
Have a look here, it explain how to configure freeradius to
authenticate against
ADhttps://github.com/inverse-inc/packetfence/blob/devel/docs/PacketFence_Administration_Guide.asciidoc#option-2-authentication-against-active-directory-ad
Any help is appreciated,
Best regard,
On 14 March 2015 at 20:49, Durand fabrice <[email protected]> <[email protected]> <[email protected]> <[email protected]>
<[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
<[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> wrote:
Hello Minh,
your packetfence config looks ok, now next step is to configure your cisco
switch, so let's check the
documentation:https://github.com/inverse-inc/packetfence/blob/devel/docs/PacketFence_Network_Devices_Configuration_Guide.asciidoc#cisco
If your cisco switch support MAB then use it and let's configure only one
port for the test.
On the packetfence side add a new switch, select Voip enabled, configure
the role (registration: 210, isolation: 220, voip: 124, default: 123),
radius secret, snmp v2c and set the community read and write. (btw enable
snmp on the cisco switch too).
So now if you plug a device in the test switch port a radius request will
go on packetfence server (radius server 10.126.122.27) and pf will answer
the registration vlan (210).
You will hit the portal (you can create a portal profile base with a
filter like switch ip) and register on a authentication source and pf will
return the vlan id based on the role the authentication source set based on
the rules.
For iphone, if you plug it in the switch port then packetfence will try to
know if it's an ipphone by doing an snmp read on the cdp/lldp mib and if
the flag is on then packetfence will answer a specific radius attribute to
tell the switch to use the voip vlan configured on the switch port (switch
port voice vlan 124).
For printer you can create a violation based on the dhcp fingerprint, like
if packetfence detect that it's a printer then register the device and set
the role to printer (of course add a new category and assign the correct
vlan id to the role in the switch config).
For the wifi it's the same workflow (it depend of your AP) but if it
support Mac auth then folow the configuration and create a portal profile
with ssid filter = your ssid and add the sponsor source.
Btw you will probably have to add a Active Directory auth source and set
rule that will set a role as default , an access duration to 1W and add a
Mark as Sponsor (for wifi sponsor).
Regards
Fabrice
Le 2015-03-14 05:23, Minh Trung a écrit :
Hello experts,
I am newbie.
My network as attached file and i suggested i should use PF as Vlan
enforcement.
My infrastructure already has:
Vlan122: Servers (including PF server, pf is vmware)
Vlan123: Office Users (PCs, Desktops, IP Phone, Printer)
Vlan124: Telephone
Vlan:125 Firewall
Vlan126: Access Door
.........
I already own DNS, DHCP by Windows server
Vlan123 will be DHCP via Windows Server 2008
Now i want PF only apply for Vlan123, how to do that and which method i
should use to authenticate for all Users, IP phone, Printer (This Vlan used
wired)?
I also plan used wifi in case visitor come to work, which authenticate
method should i used in this case?
On PF server already created 2 Vlan Registration and Isolation.
These are config file that PF generated:
*#pf.conf:[interface eth0]ip=10.126.122.27 --> my IP address's PF server
type=managementmask=255.255.255.0[interface
eth0.210]enforcement=vlanip=10.126.210.1type=internalmask=255.255.255.0[interface
eth0.220]enforcement=vlanip=10.126.220.1type=internalmask=255.255
[The entire original message is not included.]
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
PacketFence-users mailing
[email protected]https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website,
sponsored
by Intel and developed in partnership with Slashdot Media, is your hub
for all
things parallel software development, from weekly thought leadership
blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
