Hello Earl,
With which equipment you are using the OpenWRT ?
The radius part is handle by Hostapd and wpad so make sure that these two
packages are installed ( hostap-common + wpad ).
Thanks,
Ludovic Zammit
[email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) ::
www.inverse.ca <http://www.inverse.ca/>
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu <http://www.sogo.nu/>)
and PacketFence (http://packetfence.org <http://packetfence.org/>)
> Le 2015-05-18 à 16:18, Earl Robinson <[email protected]> a écrit :
>
> I've been working to get PacketFence (v5.0.1) working with OpenWRT (devel v15
> r46557).
>
> My end goal is to have PacketFence controlling the OpenWRT AP in VLAN mode,
> using dynamic VLAN assignment. I've followed the PF Device configuration
> guide and the administration guide, the new ZEN out-of-band quick guide. I've
> used various docs to sett up the OpenWRT AP including this one:
> http://wiki.openwrt.org/doc/howto/wireless.security.8021x
> <http://wiki.openwrt.org/doc/howto/wireless.security.8021x>
>
> I've been able to get a cisco 3560 switch working great. When I connect a
> device, the cisco switch automatically send a RADIUS auth request to the pf
> server using the device mac address (mab). And when I auth to the pf server
> via the web, my VLAN is reassigned properly.
>
> With the same client devices, I can connect to an open SSID on the AP, but
> then get no RADIUS traffic (dynamic VLANs and nab doesn't work with an open
> SSID?). So I have to set the SSID to WPA2, and then I get an 802.1x auth
> prompt on the client, which generates a RADIUS request back to pf.
>
> There's a thread on the openwrt list from 2013-2014:
> https://forum.openwrt.org/viewtopic.php?id=44968
> <https://forum.openwrt.org/viewtopic.php?id=44968>
> which seems to show Fabrice was able to implement what I want with earlier
> versions of OpenWRT, but with heavy mods. The current devel version is
> supposed to work without any special mods.
>
> Has anybody been able to get this working recently, and if so have any
> guidance? At this point I believe my problem lies on the OpenWRT side, but I
> figure somebody on this list is likely to know the fix.
>
> Thanks,
> Earl
> ------------------------------------------------------------------------------
> One dashboard for servers and applications across Physical-Virtual-Cloud
> Widest out-of-the-box monitoring support with 50+ applications
> Performance metrics, stats and reports that give you Actionable Insights
> Deep dive visibility with transaction tracing using APM Insight.
> http://ad.doubleclick.net/ddm/clk/290420510;117567292;y_______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
