Hey Ludovic,
I'm running on a TP-Link Archer C7 v2 and a TP-Link TL-WDR4300 v1. I have
hostapd and hostapd-common installed. If I try to install wpad i get the
error:
root@OpenWRT:~# opkg install wpad
Installing wpad (2015-03-25-1) to root...
Downloading
http://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/packages/base/wpad_2015-03-25-1_ar71xx.ipk
.
Collected errors:
* check_data_file_clashes: Package wpad wants to install file
/usr/sbin/hostapd
But that file is already provided by package * hostapd
* opkg_install_cmd: Cannot install package wpad.
-earl
On Tue, May 19, 2015 at 10:53 AM, Ludovic Zammit <[email protected]> wrote:
> Hello Earl,
>
> With which equipment you are using the OpenWRT ?
>
> The radius part is handle by Hostapd and wpad so make sure that these two
> packages are installed ( hostap-common + wpad ).
>
> Thanks,
>
> Ludovic [email protected] <[email protected]> :: +1.514.447.4918
> (x145) :: www.inverse.ca
> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence
> (http://packetfence.org)
>
>
>
>
>
>
> Le 2015-05-18 à 16:18, Earl Robinson <[email protected]> a écrit :
>
> I've been working to get PacketFence (v5.0.1) working with OpenWRT (devel
> v15 r46557).
>
> My end goal is to have PacketFence controlling the OpenWRT AP in VLAN
> mode, using dynamic VLAN assignment. I've followed the PF Device
> configuration guide and the administration guide, the new ZEN out-of-band
> quick guide. I've used various docs to sett up the OpenWRT AP including
> this one:
> http://wiki.openwrt.org/doc/howto/wireless.security.8021x
>
> I've been able to get a cisco 3560 switch working great. When I connect a
> device, the cisco switch automatically send a RADIUS auth request to the pf
> server using the device mac address (mab). And when I auth to the pf server
> via the web, my VLAN is reassigned properly.
>
> With the same client devices, I can connect to an open SSID on the AP, but
> then get no RADIUS traffic (dynamic VLANs and nab doesn't work with an open
> SSID?). So I have to set the SSID to WPA2, and then I get an 802.1x auth
> prompt on the client, which generates a RADIUS request back to pf.
>
> There's a thread on the openwrt list from 2013-2014:
> https://forum.openwrt.org/viewtopic.php?id=44968
> which seems to show Fabrice was able to implement what I want with earlier
> versions of OpenWRT, but with heavy mods. The current devel version is
> supposed to work without any special mods.
>
> Has anybody been able to get this working recently, and if so have any
> guidance? At this point I believe my problem lies on the OpenWRT side, but
> I figure somebody on this list is likely to know the fix.
>
> Thanks,
> Earl
>
> ------------------------------------------------------------------------------
> One dashboard for servers and applications across Physical-Virtual-Cloud
> Widest out-of-the-box monitoring support with 50+ applications
> Performance metrics, stats and reports that give you Actionable Insights
> Deep dive visibility with transaction tracing using APM Insight.
>
> http://ad.doubleclick.net/ddm/clk/290420510;117567292;y_______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
>
> ------------------------------------------------------------------------------
> One dashboard for servers and applications across Physical-Virtual-Cloud
> Widest out-of-the-box monitoring support with 50+ applications
> Performance metrics, stats and reports that give you Actionable Insights
> Deep dive visibility with transaction tracing using APM Insight.
> http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
