It may not be your config that’s wrong. It may be that the switch is not sending accounting data to PacketFence.
Have you configured RADIUS accounting on the 2960? Regards, -- Louis Munro [email protected] :: www.inverse.ca +1.514.447.4918 x125 :: +1 (866) 353-6153 x125 Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org) On Jul 22, 2015, at 1:11 , Hubert Kupper <[email protected]> wrote: > Hello, > > I have running Packetfence-ZEN-5-1 fine. I created a test bandwidth > violation of 2MB/Day but nothing happens when a client uses more than > 2MB traffic. The web interface shows "there is not enough data to create > the graph" and violation.log shows only DHCP violations. > > I added the following line to the Cisco 2960G in switches.conf: > > deauthMethod=RADIUS > > In violations.conf: > > [1100013] > desc=Bandwidth Limit test (2MB/day) > template=bandwidth_limit > #hk090715 trigger=Accounting::BandwidthExpired > trigger=Accounting::TOT2MBD > window=dynamic > enabled=Y > actions=trap,log > priority=1 > auto_enable=N > whitelisted_categories= > vlan=isolation > > > So what is wrong with my config? > > Best regards, > Hubert > > ------------------------------------------------------------------------------ > _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
