Yes, I have done this.
On the 2960G:
aaa authentication dot1x default group radius
aaa accounting dot1x default start-stop group radius
Regards, Hubert
Am 22.07.2015 um 20:16 schrieb Louis Munro:
It may not be your config that’s wrong.
It may be that the switch is not sending accounting data to PacketFence.
Have you configured RADIUS accounting on the 2960?
Regards,
--
Louis Munro
lmu...@inverse.ca <mailto:lmu...@inverse.ca> :: www.inverse.ca
<http://www.inverse.ca>
+1.514.447.4918 x125 :: +1 (866) 353-6153 x125
Inverse inc. :: Leaders behind SOGo (www.sogo.nu <http://www.sogo.nu>)
and PacketFence (www.packetfence.org <http://www.packetfence.org>)
On Jul 22, 2015, at 1:11 , Hubert Kupper <kup...@uni-landau.de
<mailto:kup...@uni-landau.de>> wrote:
Hello,
I have running Packetfence-ZEN-5-1 fine. I created a test bandwidth
violation of 2MB/Day but nothing happens when a client uses more than
2MB traffic. The web interface shows "there is not enough data to create
the graph" and violation.log shows only DHCP violations.
I added the following line to the Cisco 2960G in switches.conf:
deauthMethod=RADIUS
In violations.conf:
[1100013]
desc=Bandwidth Limit test (2MB/day)
template=bandwidth_limit
#hk090715 trigger=Accounting::BandwidthExpired
trigger=Accounting::TOT2MBD
window=dynamic
enabled=Y
actions=trap,log
priority=1
auto_enable=N
whitelisted_categories=
vlan=isolation
So what is wrong with my config?
Best regards,
Hubert
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
<mailto:PacketFence-users@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
--
_____________________________________________
Hubert Kupper
Universitaetsrechenzentrum in Landau
Fortstrasse 7, D-76829 Landau
Tel: +49 6341/28031173 Fax: +49 6341/28031267
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
