Hello, problem on cisco
as is the 2950 so this puts the trunk vlan above the 1002, otherwise you must manually add. I added the vlan 200. work :) I want to add the internet to this vlan (producao) PF uses the eth0 I have a wlan0 plate with internet thanks Enviado do Correio para Windows 10 De: Fabrice DURAND Enviado: 9 de outubro de 2015 16:41 Para: [email protected] Assunto: Re: [PacketFence-users] pfsetvlan problem Hello, Le 2015-10-09 11:24, ismael flavio silva a écrit : > > Hello, > > > > I am using vlan enforcement > > > > - OS: Centos 6.7 > > - PF 5.3.1 (is not ZEN) > > - Cisco equipment in 2950 > > > > the idea was to connect a PC to cisco and connect to internet, case it > is registered on packetfence, or isolate, case present vulnerabilities. > > > > part of the problem solved. > > > > create a new vlan registration, added the switch.conf (new vlan), and > added to the vlan on cisco > > > > in packetfence.log it changes the vlan 4 (macdetetction) to vlan 2 > (registration), after the registration he goes to vlan 200 (vlan > production), this far ok :) > That is perfect ! > > > > problem: > > > > he does not give, dhcp (vlan production) > > > This is normal, on your production network (vlan 200) your dhcp/dns must work, this is not the job of packetfence (it allow your device to go on the prod network, that is all). Now on the vlan 200 you have to configure your own dhcp and dns and gateway ... Regards Fabrice > checked > > > > network.conf ok > > pf.conf ok > > ifcfg-eth0.200 ok > > > > Thanks > > > > > > > > > > Enviado do Correio <http://go.microsoft.com/fwlink/?LinkId=550986> > para Windows 10 > > > > > > > *De: *Fabrice DURAND > *Enviado: *9 de outubro de 2015 14:00 > *Para: *[email protected] > *Assunto: *Re: [PacketFence-users] pfsetvlan problem > > > > > > Hello, > > what are you trying to do ? > What switch are you using ? > Are you using inline ,out of band or web-auth ? > > You are not clear in your questions, it just like "it doesn't work, > help me !" > > Start your configuration simple, and forget nessus for now and follow > this guide : > http://www.packetfence.org/downloads/PacketFence/doc/PacketFence_Out-of-Band_Deployment_Quick_Guide_ZEN-5.4.0.pdf > > Regards > Fabrice > > Le 2015-10-08 21:47, ismael flavio silva a écrit : > > hello > > > > It was a bad configuration on switch > > > > check in the community :) > > > > i have two problems: > > > > 1ª > > PF start vlan 4 macDetetction -> vlan 2 registrtion (registration > ok) -> vlan 4 again :( > > > > its should go to vlan 1 (normal vlan), but vlan 1 it is vlan > management this vlan not used DHCP... hum > > > > I have to create a new vlan to have internet? > > > > 2ª > > I can not isolate a xp wndows with nessus > > > > thanks > > > > Enviado do Correio <http://go.microsoft.com/fwlink/?LinkId=550986> > para Windows 10 > > > > > > > *De: *ismael flavio silva > *Enviado: *9 de outubro de 2015 01:21 > *Para: *ismael flavio silva > *Assunto: *RE: [PacketFence-users] pfsetvlan problem > > > > > > Hello, > > > > I already solve :) > > > > I wanted to isolate a windows xp, but he can not isolate > > > > I created a scan with Nessus, but does nothing L > > > > thanks > > > > Enviado do Correio <http://go.microsoft.com/fwlink/?LinkId=550986> > para Windows 10 > > > > > > > *De: *ismael flavio silva > *Enviado: *9 de outubro de 2015 01:17 > *Para: *[email protected] > <mailto:[email protected]> > *Assunto: *[PacketFence-users] pfsetvlan problem > > > > > > Hello > > > > I used vlan enforcement > > > > presents this error: (packetfence.log) > > > > pfsetvlan(3) WARN: Can´t determine Uplinks for the switch > (192.168.100.254) -> do nothing (pf::vlan::doWeActOnThisTrap) > > pfsetvlan(3) INFO: doWeActiOnThisTrap returns false. Stop up > handling (main::handleTrap) > > pfsetvlan(3) INFO: finished (main::cleanupAfterThread) > > > > researched and appears to be snmptrapd.conf but exist different > three against the system! > > > > look > > > > /usr/local/pf/var/conf/snmtrapd.conf > > /usr/local/pf/conf/snmtrapd.conf > > /etc/snmp/snmtrapd.conf > > > > how to solve the problema? > > > > Thanks > > > > > > > > Enviado do Correio <http://go.microsoft.com/fwlink/?LinkId=550986> > para Windows 10 > > > > > > > > > > > > > >------------------------------------------------------------------------------ > > > > > _______________________________________________ > > PacketFence-users mailing list > > [email protected] > <mailto:[email protected]> > > https://lists.sourceforge.net/lists/listinfo/packetfence-users > > > > > -- > Fabrice Durand > [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x135) :: > www.inverse.ca <http://www.inverse.ca> > Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence > (http://packetfence.org) > > > > > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users -- Fabrice Durand [email protected] :: +1.514.447.4918 (x135) :: www.inverse.ca Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence (http://packetfence.org)
------------------------------------------------------------------------------
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
