Hi Derek,
Thanks for your answer.
Here you have the requested output.
VLAN1 (management VLAN): subnet 192.168.110.0/24
VLAN100 (production VLAN): subnet 192.168.100.0/24
VLAN200 (registration VLAN): subnet 172.22.0.0/24
I’ve slightly changed the numbers for VLAN and IP subnet for security reasons
(call me paranoid :).
-- BEGIN --
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:56:9A:AA:53
inet addr:192.168.110.156 Bcast:192.168.110.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe9a:aa53/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1991164 errors:0 dropped:0 overruns:0 frame:0
TX packets:209700 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:181578443 (173.1 MiB) TX bytes:250558804 (238.9 MiB)
eth0.100 Link encap:Ethernet HWaddr 00:50:56:9A:AA:53
inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe9a:aa53/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:215311 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:14085396 (13.4 MiB) TX bytes:1644 (1.6 KiB)
eth0.200 Link encap:Ethernet HWaddr 00:50:56:9A:AA:53
inet addr:172.22.0.2 Bcast:172.22.0.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe9a:aa53/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3129 errors:0 dropped:0 overruns:0 frame:0
TX packets:1677 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:294083 (287.1 KiB) TX bytes:305954 (298.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:3291151 errors:0 dropped:0 overruns:0 frame:0
TX packets:3291151 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2415838425 (2.2 GiB) TX bytes:2415838425 (2.2 GiB)
-- END –
-- BEGIN –
# service packetfence status
service|shouldBeStarted|pid
carbon-cache|1|2525
carbon-relay|1|2532
collectd|1|2535
dhcpd|1|2552
haproxy|0|0
httpd.aaa|1|2554
httpd.admin|1|2497
httpd.graphite|1|2565
httpd.portal|1|2581
httpd.proxy|0|0
httpd.webservices|1|2605
iptables|1|-1
memcached|1|2481
pfbandwidthd|0|0
pfdetect|0|0
pfdhcplistener_eth0.200|1|2639
pfdhcplistener_eth0|1|2648
pfdhcplistener_eth0.100|1|0
pfdns|1|2651
pfmon|1|2677
pfsetvlan|0|0
radiusd|1|2723
radsniff3|1|2732
snmptrapd|0|0
snort|0|0
statsd|1|0
suricata|0|0
keepalived|0|0
-- END –
The line “pfdhcplistener_eth0.100|1|0” is actually in red.
In Pfence web GUI, Configuration --> interfaces, what should be the type for
the interface? Right now, eth0 is set to Management, eth0.100 is set to Other,
and eth0.200 is set to Registration.
I actually did create the new interface eth0.100 through the web GUI, and later
modified the /usr/local/pf/conf/pf.conf file to add the “type=dhcp-listener” to
the section “eth0.100”.
Is this correct?
Is there any way to improve logging level, to help debugging?
Any clue about what could be wrong?
Best regards,
Josep M. Torne
De: Derek Wuelfrath [mailto:[email protected]]
Enviado el: lunes, 16 de noviembre de 2015 16:44
Para: ML PF
Asunto: Re: [PacketFence-users] dhcplistener configuration
Josep,
Can you send output of ‘ifconfig’ and ’service packetfence status’
Thanks
Cheers!
dw.
—
Derek Wuelfrath
[email protected] <mailto:[email protected]> :: +1.514.447.4918 (x110)
:: +1.866.353.6153 (x110)
Inverse inc. :: Leaders behind SOGo (www.sogo.nu <http://www.sogo.nu> ) and
PacketFence (www.packetfence.org <http://www.packetfence.org> )
------------------------------------------------------------------------------
Presto, an open source distributed SQL query engine for big data, initially
developed by Facebook, enables you to easily query your data on Hadoop in a
more interactive manner. Teradata is also now providing full enterprise
support for Presto. Download a free open source copy now.
http://pubads.g.doubleclick.net/gampad/clk?id=250295911&iu=/4140
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
