Hello PacketFence Users,
I'm trying to integrate some Juniper switches in PacketFence but don't
seem to get the interfaces correctly configured.
I followed the instructions of the two user manuals (network and
administration) and have it partly working...
When no device is attached to the switch port I see:
> show ethernet-switching interfaces ge-0/0/20
> Interface State VLAN members Tag Tagging Blocking
> ge-0/0/20.0 down default untagged blocked
by STP
> show dot1x interface ge-0/0/20
> 802.1X Information:
> Interface Role State MAC
address User
> ge-0/0/20.0 Authenticator Initialize
When I attach a device to the switch port I see:
> show ethernet-switching interfaces ge-0/0/20
> Interface State VLAN members Tag Tagging Blocking
> ge-0/0/20.0 up default untagged unblocked
> registration 12 untagged
unblocked
> show dot1x interface ge-0/0/20
> 802.1X Information:
> Interface Role State MAC
address User
> ge-0/0/20.0 Authenticator Authenticated 00:14:9A:13:1E:F3
00149a131ef3
The device does get an ip address from the DHCP server but can't reach
anything inside its vlan. Most likely the problem is that there are 2
untagged vlans configured after the dot1x authentication.
But the default vlan automatically appears after adding the unit 0
config as instructed:
> unit 0 {
> family ethernet-switching {
> port-mode access;
> }
> }
When I manually configure the vlan members on the switch port I can
simulate the PacketFence registration flow, so everything in between
looks fine.
Any pointers on what could be wrong on switch or PacketFence side?
Could anybody with a simmilar setup share some config details on both sides?
Greets,
Maarten
PacketFence 5.7.0 on CentOS release 6.7 (Final)
Juniper EX2200 15.1R3.6
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users