To answer my on question...
There where still some secure-acces-port settings active on the vlan:
> vlan registration {
> arp-inspection;
> examine-dhcp;
> ip-source-guard;
> }
at least one of these options causes problems with the mac based
authentication...
after removing these it is all working fine.
greets,
Maarten
On 04/06/16 10:15, Maarten Rootsaert wrote:
> Hello PacketFence Users,
>
> I'm trying to integrate some Juniper switches in PacketFence but don't
> seem to get the interfaces correctly configured.
> I followed the instructions of the two user manuals (network and
> administration) and have it partly working...
>
> When no device is attached to the switch port I see:
>> show ethernet-switching interfaces ge-0/0/20
>> Interface State VLAN members Tag Tagging Blocking
>> ge-0/0/20.0 down default untagged blocked
> by STP
>> show dot1x interface ge-0/0/20
>> 802.1X Information:
>> Interface Role State MAC
> address User
>> ge-0/0/20.0 Authenticator Initialize
> When I attach a device to the switch port I see:
>> show ethernet-switching interfaces ge-0/0/20
>> Interface State VLAN members Tag Tagging Blocking
>> ge-0/0/20.0 up default untagged unblocked
>> registration 12 untagged
> unblocked
>> show dot1x interface ge-0/0/20
>> 802.1X Information:
>> Interface Role State MAC
> address User
>> ge-0/0/20.0 Authenticator Authenticated 00:14:9A:13:1E:F3
> 00149a131ef3
>
> The device does get an ip address from the DHCP server but can't reach
> anything inside its vlan. Most likely the problem is that there are 2
> untagged vlans configured after the dot1x authentication.
> But the default vlan automatically appears after adding the unit 0
> config as instructed:
>> unit 0 {
>> family ethernet-switching {
>> port-mode access;
>> }
>> }
> When I manually configure the vlan members on the switch port I can
> simulate the PacketFence registration flow, so everything in between
> looks fine.
>
> Any pointers on what could be wrong on switch or PacketFence side?
> Could anybody with a simmilar setup share some config details on both sides?
>
> Greets,
> Maarten
>
> PacketFence 5.7.0 on CentOS release 6.7 (Final)
> Juniper EX2200 15.1R3.6
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Find and fix application performance issues faster with Applications Manager
Applications Manager provides deep performance insights into multiple tiers of
your business applications. It resolves application problems quickly and
reduces your MTTR. Get your free trial! http://pubads.g.doubleclick.net/
gampad/clk?id=1444514301&iu=/ca-pub-7940484522588532
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users