Hello everyone,
I try to configure a network with the following topology:
eth0 : a.b.c.2/24 (Public IP)
eth1: d.e.f.2/24 (Public IP) (behind the router)
I planned to have a DHCP server on Packetfence to distribute a private
network 192.168.0.0/24 behind eth0. However, I could not find out which
network topology I should use on Packetfence.
The things I have tried:
1) Configuring an IP alias eth0:0 for eth0 (on Linux server running
Packetfence) and add routed network as 192.168.0.0/24. This does not
even distribute IP addresses for clients.
2) Configuring an IP alias eth0:0 for eth0 and configuring a bridge
network behind eth0:0 such that I turn DHCP on for br0 on packetfence.
This allows me to distribute IP addresses but the clients could not be
redirected to captive portal and hence does not connect to internet.
3) I added a routed network on packetfence without any alias or bridge
configuration on the server but again this does not work.
4) I added Vlan's on Packetfence to have the specified network on one of
them. DHCP didn't work again.
I attach the planned configuration and would like to request help from
the community.
Thank you
------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
