Hi,
hi there
> do somebody have a complete guide how to setup packetfence with cisco
> wlc? The administration guide on packetfence.org is not complete...
Only the "Switch" Configuration example is missing. The WLC Config is ok.
You just have to set:
- IP-Address: <your WLC IP Address>
- Controller IP: <your WLC IP Address>
- Controller Port: 1700
- Define your Roles
- Set Your Secret (Remember to set the same secret you defined in your WLC
Config)
That's it
> We always get the error on wlc, that wlc do not get any respond from
> packetfence.
>
> If you got any timeout, look if you set the correct secret, port and IP of
your PF Server.
If you think everything is fine try to capture incoming packets with
tcpdump.
Greetings
Tobias
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
