We have been successfully using PacketFence with Huawei S5700-28X-LI-AC switches following the instructions for the S5710 in section 4.19 of the Network Devices Configuration Guide. The recent batch of switches we bought came with VRP software v2r7 rather than v2r3 we have on our current switches, and the instructions no longer work. We are using VLAN enforcement with MAC Auth.
I can see radius send an Access-Accept with the correct vlan to change to, but the switch just ignores it. We have the option of downgrading the switches but we would prefer to use v2r7 or v2r8 due to security updates etc. Does any Huawei users out there know what changes we need to make to the switch to get PacketFence working again? Thanks, Paul -- Paul Coates, Newcastle University, Network Team ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
