Hello,
I’m just setting up PF ZEN for a non-profit I work with, and I’m wondering if
there is a way to send a custom RADIUS attribute based on the role. This would
be to override the QoS setting for some users.
We operate a camp in a remote location, where our only access to the Internet
is via a private satellite link. For wireless, I have a cisco WLC (a pair of
WLC 4404s) going, with coverage in our staff housing.
In order to protect our meagre resources (we only have 3.3Mbps access to the
outside world), what I would like to do is have the system be able to set the
QoS level for our short term volunteers to “Bronze” as Cisco defines it. Within
that, I’ll probably rate limit them to something like 250kbps, which should be
fine for email, facebook, iMessage, etc…
Anyhow, in reading the available documentation here:
http://www.cisco.com/c/en/us/support/docs/wireless/4100-series-wireless-lan-controllers/96103-wlc-attributes.html
<http://www.cisco.com/c/en/us/support/docs/wireless/4100-series-wireless-lan-controllers/96103-wlc-attributes.html>
I should be able to push the radius attributes and override the QoS level for
the network.
If I have to muck around in the config files, that’s fine, I just need to be
pointed in the right direction. :)
Thanks,
Hans
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
