Look at the radius filters.  Match category and add an arbitrary radius
attribute pair.

Sent from my iPhone

On Apr 30, 2017, at 5:58 PM, Hans Johnson <[email protected]> wrote:

Hello,

I’m just setting up PF ZEN for a non-profit I work with, and I’m wondering
if there is a way to send a custom RADIUS attribute based on the role. This
would be to override the QoS setting for some users.

We operate a camp in a remote location, where our only access to the
Internet is via a private satellite link. For wireless, I have a cisco WLC
(a pair of WLC 4404s) going, with coverage in our staff housing.

In order to protect our meagre resources (we only have 3.3Mbps access to
the outside world), what I would like to do is have the system be able to
set the QoS level for our short term volunteers to “Bronze” as Cisco
defines it. Within that, I’ll probably rate limit them to something like
250kbps, which should be fine for email, facebook, iMessage, etc…

Anyhow, in reading the available documentation here:

http://www.cisco.com/c/en/us/support/docs/wireless/4100-series-wireless-lan-controllers/96103-wlc-attributes.html

I should be able to push the radius attributes and override the QoS level
for the network.

If I have to muck around in the config files, that’s fine, I just need to
be pointed in the right direction. :)

Thanks,

Hans

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to