I've tested ANY type of deauth in switch config. Note : I use SNMP v2c by
default, should I move to SNMPv3 ?
Da: Alessandro Canella via PacketFence-users
[mailto:[email protected]]
Inviato: martedì 18 luglio 2017 16.41
A: [email protected]
Cc: Alessandro Canella <[email protected]>
Oggetto: [PacketFence-users] R: DLINK DGS3100
Hi where's location of pfqueue.log ?
Da: Durand fabrice via PacketFence-users
[mailto:[email protected]]
Inviato: giovedì 13 luglio 2017 02.25
A:
[email protected]<mailto:[email protected]>
Cc: Durand fabrice
Oggetto: Re: [PacketFence-users] DLINK DGS3100
Hello Alessandro,
your issue happen when packetfence try to deauth.
Can you check in pfqueue.log for deauth issue ?
Regards
Fabrice
Le 2017-07-12 à 04:05, Alessandro Canella via PacketFence-users a écrit :
Hello All,
I'm developing a solution with PF ZEN and a Dlink DGS3100 infrastructure in OOB
scenario.
I've got some trouble to find correct syntax : registration VLAN is Ok, auth on
captive works fine, but at least, redirect on correct VLAN doesn't happens.
Note that other test works fine (If I put in force auth same ports I go to
production network an so on)
Someone got ideas?
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
