Hello Fabrice,
Thanks for your reply but I’m still wrestling with the config at all and I’m
having so further questions.First let me tell you my plans. I’d like to use pf
in the vlan-enf mode with a openwrt router with hostapd and the radius with
local auth (for testing).
I configurated the network as I wrote in my last mail. So pf and the openwrt ap
are in the 10.0.0.x network without any vlan. I created a vlan each for
registration and isolation as described in this guide:
https://packetfence.org/doc/PacketFence_Out-of-Band_Deployment_Quick_Guide_ZEN.html#_configuring_your_packetfence_environment
<https://packetfence.org/doc/PacketFence_Out-of-Band_Deployment_Quick_Guide_ZEN.html#_configuring_your_packetfence_environment>
and the linking of the ap after that guide
https://packetfence.org/doc/PacketFence_OpenWrt-Hostapd-15-05_Quick_Install_Guide.html
<https://packetfence.org/doc/PacketFence_OpenWrt-Hostapd-15-05_Quick_Install_Guide.html>
which contains two errors I’d like to report. The linking of the ap works fine
so far. Initially I plan to use default role which I allowed to register up to
10 devices. Here my troubles are starting: Which Authentication Sources shall
use?
At the moment I’m using the default connection profile with the local source.
If I connect a device via wifi to the network I can see the following lines in
the log of hostapd:
Sat Aug 26 18:09:37 2017 daemon.info <http://daemon.info/> hostapd: wlan0: STA
00:13:ce:ec:9e:27 IEEE 802.11: authenticated
Sat Aug 26 18:09:37 2017 daemon.info <http://daemon.info/> hostapd: wlan0: STA
00:13:ce:ec:9e:27 IEEE 802.11: associated (aid 1)
Sat Aug 26 18:09:37 2017 daemon.info <http://daemon.info/> hostapd: wlan0: STA
00:13:ce:ec:9e:27 RADIUS: starting accounting session 59A1541A-0000001E
If I check auto registration of new devices in the connection profile the
device even gets registrated but no the wifi won’t connect. I stored the radius
credentials as demanded in the /usr/local/pf/raddb/users file. Which point am I
missing? Do I need further configurations? Honestly sometimes I’m feeling lost
in the guides of pf.
Two last questions for my own understanding. The users section in pf web menu.
Is it the “local” auth source? And If I use the auth source htpasswd do I need
to create a user in the users section?
Best regards and sorry for the large amount of questions/problems
Moritz
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
