You can also do it directly without filters. I don't have access to my
system right now, but there was an option to map a user's profile to a
device profile. At least on the latest version of PF, the Aruba plugin has
support for "returnRoleAttribute" and it is specified in the radius VSA
called"Aruba-User-Role"
If you have roles (where you assign a bandwidth cap) on your aruba
controller, you can then map the PF role to an arbitrary string for each of
the Roles in packetfence.
Go to the "switches" section in PF, then click on the Aruba Controller and
go into the "Roles" Tab. There you can assign different VLANs to the
different roles - if you're using vlans for registration vs general use or
want to assign different vlans to different users, do it there. Then scroll
down to "Role Mapping by Switch Role" and enable the checkbox. Then for
each role in PF, type the corresponding group / role /
whatever-aruba-calls-it so that it will match the name you configured in
the Aruba controller.
I use it with a Ruckus controller with no issues, but you might need to
enable something like RBAC on the Aruba (Role-Based access control) or
something similar for your controller.
for example, in my case, I have some roles (in the wireless controller, not
in PF) called "1mb", "5mb" , "10mb", etc.. My pf roles are "students"
"teachers" "admins" and "violation"
students get 5mb
teahers 10mb
admins 10mb
violation 1mb
and in case of bandwitdth violation, I put them down to the "violation"
role
See here for more details on the aruba use
http://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/Firewall_Roles/User_Role_Assignments.htm
http://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/AAA_Servers/Server_Groups.htm#aaa_servers_3503549366_1051297
good luck!
On Fri, Sep 8, 2017 at 10:26 AM, Antoine Amacher via PacketFence-users <
[email protected]> wrote:
> Hello Lucas,
>
>
> To send a specific RADIUS attribute in answer you will need to work with
> the RADIUS filter.
>
>
> From there you can choose a condition for example an SSID or the device
> role in PacketFence, then custom what RADIUS answer you send. For instance
> Filter-Id => 10,
>
> You have examples in the file conf/radius_filter.conf.example
>
>
> Thanks
>
> On 09/08/2017 08:52 AM, luca comes via PacketFence-users wrote:
>
> Ok Diego,
>
> I will try but it's not so clear to me how to proceed. I understand that I
> should create a new connection profile similar to the one I use in normal
> operation and assign role on the violation? How can I send vsa back to the
> controller?
>
>
> Luca
>
>
>
>
> ------------------------------
> *Da:* Diego Garcia del Rio <[email protected]> <[email protected]>
> *Inviato:* venerdì 8 settembre 2017 14:29
> *A:* luca comes
> *Cc:* [email protected]
> *Oggetto:* Re: [PacketFence-users] Bandwidth limit
>
> Ciao Luca. I would imagine Aruba can do rate limits on the AP. You need
> to find which radius vsa to send so that it can apply a profile to the user
> and do the rate limit.
>
> On Sep 8, 2017 07:02, "luca comes" <[email protected]> wrote:
>
>> Hi Diego,
>>
>> It's an Aruba appliance.
>>
>>
>> Luca
>>
>>
>> Inviato da Outlook <http://aka.ms/weboutlook>
>>
>>
>> ------------------------------
>> *Da:* Diego Garcia del Rio <[email protected]>
>> *Inviato:* giovedì 7 settembre 2017 17:04
>> *A:* [email protected]
>> *Cc:* luca comes
>> *Oggetto:* Re: [PacketFence-users] Bandwidth limit
>>
>> Hi Luca,
>>
>> I don't have experience with the "inline mode" of PF. I haven't seen any
>> options to do bandwidth limiting in the UI though, so I would not keep my
>> hopes up.
>>
>> What controller do you have?
>>
>>
>> On Thu, Sep 7, 2017 at 3:37 AM, luca comes via PacketFence-users <
>> [email protected]> wrote:
>>
>>> Hi Diego,
>>> thank you for your answer. What about if I put PF inline in front of the
>>> WiFi controller? Could it perform rate limit after user authentication when
>>> the IP assigned is known without working on the controller?
>>>
>>> Luca
>>>
>>>
>>> ------------------------------
>>> *Da:* Diego Garcia del Rio <[email protected]>
>>> *Inviato:* lunedì 4 settembre 2017 20:23
>>> *A:* [email protected]
>>> *Cc:* luca comes
>>> *Oggetto:* Re: [PacketFence-users] Bandwidth limit
>>>
>>> You can do this by assinging a new profile to the user as the action of
>>> the bandwidth violation. Of course the capability to rate limit will depend
>>> on the device doing the access. If its a fairly advanced wifi, you could do
>>> it, but might be impossible or hard on wired switches (especially lower
>>> end)
>>>
>>>
>>>
>>> On Mon, Sep 4, 2017 at 5:41 AM, luca comes via PacketFence-users <
>>> [email protected]> wrote:
>>>
>>>> Dear all,
>>>>
>>>> I have a customer who need to restrict bandwidth to IP/user when they
>>>> exceed the limit. Is there the possibility using PF? Can you drive me to
>>>> documentation or some example to understand the possibilities?
>>>>
>>>>
>>>> Thanks
>>>>
>>>>
>>>> Luca
>>>>
>>>>
>>>>
>>>> Inviato da Outlook <http://aka.ms/weboutlook>
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> PacketFence-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>>
>>>>
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> PacketFence-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>
>>>
>>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> _______________________________________________
> PacketFence-users mailing
> [email protected]https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
> --
> Antoine [email protected] :: www.inverse.ca
> +1.514.447.4918 x130 :: +1 (866) 353-6153 x130
> Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence
> (www.packetfence.org)
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users