Diego thank you so much! I will try your suggestions in a POC to show the
capability to my customer.
Luca
________________________________
Da: Diego Garcia del Rio via PacketFence-users
<[email protected]>
Inviato: venerdì 8 settembre 2017 18:00
A: [email protected]
Cc: Diego Garcia del Rio
Oggetto: Re: [PacketFence-users] Bandwidth limit
You can also do it directly without filters. I don't have access to my system
right now, but there was an option to map a user's profile to a device profile.
At least on the latest version of PF, the Aruba plugin has support for
"returnRoleAttribute" and it is specified in the radius VSA
called"Aruba-User-Role"
If you have roles (where you assign a bandwidth cap) on your aruba controller,
you can then map the PF role to an arbitrary string for each of the Roles in
packetfence.
Go to the "switches" section in PF, then click on the Aruba Controller and go
into the "Roles" Tab. There you can assign different VLANs to the different
roles - if you're using vlans for registration vs general use or want to assign
different vlans to different users, do it there. Then scroll down to "Role
Mapping by Switch Role" and enable the checkbox. Then for each role in PF,
type the corresponding group / role / whatever-aruba-calls-it so that it will
match the name you configured in the Aruba controller.
I use it with a Ruckus controller with no issues, but you might need to enable
something like RBAC on the Aruba (Role-Based access control) or something
similar for your controller.
for example, in my case, I have some roles (in the wireless controller, not in
PF) called "1mb", "5mb" , "10mb", etc.. My pf roles are "students" "teachers"
"admins" and "violation"
students get 5mb
teahers 10mb
admins 10mb
violation 1mb
and in case of bandwitdth violation, I put them down to the "violation" role
See here for more details on the aruba use
http://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/Firewall_Roles/User_Role_Assignments.htm
http://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/AAA_Servers/Server_Groups.htm#aaa_servers_3503549366_1051297
good luck!
On Fri, Sep 8, 2017 at 10:26 AM, Antoine Amacher via PacketFence-users
<[email protected]<mailto:[email protected]>>
wrote:
Hello Lucas,
To send a specific RADIUS attribute in answer you will need to work with the
RADIUS filter.
>From there you can choose a condition for example an SSID or the device role
>in PacketFence, then custom what RADIUS answer you send. For instance
>Filter-Id => 10,
You have examples in the file conf/radius_filter.conf.example
Thanks
On 09/08/2017 08:52 AM, luca comes via PacketFence-users wrote:
Ok Diego,
I will try but it's not so clear to me how to proceed. I understand that I
should create a new connection profile similar to the one I use in normal
operation and assign role on the violation? How can I send vsa back to the
controller?
Luca
________________________________
Da: Diego Garcia del Rio <[email protected]><mailto:[email protected]>
Inviato: venerdì 8 settembre 2017 14:29
A: luca comes
Cc:
[email protected]<mailto:[email protected]>
Oggetto: Re: [PacketFence-users] Bandwidth limit
Ciao Luca. I would imagine Aruba can do rate limits on the AP. You need to
find which radius vsa to send so that it can apply a profile to the user and do
the rate limit.
On Sep 8, 2017 07:02, "luca comes"
<[email protected]<mailto:[email protected]>> wrote:
Hi Diego,
It's an Aruba appliance.
Luca
Inviato da Outlook<http://aka.ms/weboutlook>
________________________________
Da: Diego Garcia del Rio <[email protected]<mailto:[email protected]>>
Inviato: giovedì 7 settembre 2017 17:04
A:
[email protected]<mailto:[email protected]>
Cc: luca comes
Oggetto: Re: [PacketFence-users] Bandwidth limit
Hi Luca,
I don't have experience with the "inline mode" of PF. I haven't seen any
options to do bandwidth limiting in the UI though, so I would not keep my hopes
up.
What controller do you have?
On Thu, Sep 7, 2017 at 3:37 AM, luca comes via PacketFence-users
<[email protected]<mailto:[email protected]>>
wrote:
Hi Diego,
thank you for your answer. What about if I put PF inline in front of the WiFi
controller? Could it perform rate limit after user authentication when the IP
assigned is known without working on the controller?
Luca
________________________________
Da: Diego Garcia del Rio <[email protected]<mailto:[email protected]>>
Inviato: lunedì 4 settembre 2017 20:23
A:
[email protected]<mailto:[email protected]>
Cc: luca comes
Oggetto: Re: [PacketFence-users] Bandwidth limit
You can do this by assinging a new profile to the user as the action of the
bandwidth violation. Of course the capability to rate limit will depend on the
device doing the access. If its a fairly advanced wifi, you could do it, but
might be impossible or hard on wired switches (especially lower end)
On Mon, Sep 4, 2017 at 5:41 AM, luca comes via PacketFence-users
<[email protected]<mailto:[email protected]>>
wrote:
Dear all,
I have a customer who need to restrict bandwidth to IP/user when they exceed
the limit. Is there the possibility using PF? Can you drive me to documentation
or some example to understand the possibilities?
Thanks
Luca
Inviato da Outlook<http://aka.ms/weboutlook>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
--
Antoine Amacher
[email protected]<mailto:[email protected]> ::
www.inverse.ca<http://www.inverse.ca>
+1.514.447.4918 x130 :: +1 (866) 353-6153 x130
Inverse inc. :: Leaders behind SOGo (www.sogo.nu<http://www.sogo.nu>) and
PacketFence (www.packetfence.org<http://www.packetfence.org>)
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users