Hello all,
I am trying to setup a proof of concept using an Ubiquiti UniFi UAP-PRO with
the following setup:
Cisco 3560-E L3 Switch
UniFi UAP-PRO
UniFi Controller running on CentOS 7.3 (docker) on ESXi
PacketFence running on CentOS 7.3 on ESXi
The Cisco switch has the following VLANs:
VLAN 2 - registration
VLAN 3 - isolation
VLAN 4 - guest
VLAN 10 - enterprise
VLAN 20 - wireless
VLAN 100 - out of band management
I have created two SSIDs on the UniFi AP, a secure 802.1x SSID and an open
SSID. I was able to apply the patch available at
https://github.com/inverse-inc/packetfence/pull/2735 to enable 802.1x for the
secure network and this is working correctly. However, for the open guest SSID,
I am trying to do a captive portal with dynamic vlan assignment. The user would
initially be placed in the registration vlan (2) and then moved to another vlan
based on their user role (vlan 4 or 10). Both the UniFi controller VM and the
UniFi AP are in VLAN 20. On the UniFi controller, dynamic VLAN assignment
appears to only be an option under 802.1x networks, otherwise you must choose a
static VLAN. I saw the external captive portal setup for the UniFi under the
PacketFence Network Devices documentation, but I don’t believe this supports
dynamic VLAN assignment. Does anyone know of any way to do dynamic VLAN
assignment on an open wireless network with the UniFi AP, or have any
suggestions?
Thanks!
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
