Fabrice,
On the UniFi controller the “Use dynamic VLAN assignment” option only shows up 
on SSIDs using 802.1x. Is there any way to also use dynamic vlan assignment on 
open SSIDs? For open networks it only lets me specify a static VLAN to use. 

Thanks!

Sent from mobile phone

> On Dec 12, 2017, at 07:41, Fabrice Durand via PacketFence-users 
> <[email protected]> wrote:
> 
> Hello Timothy,
> 
> you must enable that:
> 
> https://raw.githubusercontent.com/inverse-inc/packetfence/ae18f50b4879cc2d4132490fcee33f2fbe53b36f/docs/images/unifi-radius.png
> 
> Regards
> 
> Fabrice
> 
>> Le 2017-12-12 à 01:37, Timothy Mullican via PacketFence-users a écrit :
>> Hello all,
>> I am trying to setup a proof of concept using an Ubiquiti UniFi UAP-PRO with 
>> the following setup:
>> 
>> Cisco 3560-E L3 Switch
>> UniFi UAP-PRO
>> UniFi Controller running on CentOS 7.3 (docker) on ESXi
>> PacketFence running on CentOS 7.3 on ESXi
>> 
>> The Cisco switch has the following VLANs:
>> VLAN 2 - registration
>> VLAN 3 - isolation 
>> VLAN 4 - guest
>> VLAN 10 - enterprise
>> VLAN 20 - wireless
>> VLAN 100 - out of band management
>> 
>> I have created two SSIDs on the UniFi AP, a secure 802.1x SSID and an open 
>> SSID. I was able to apply the patch available at 
>> https://github.com/inverse-inc/packetfence/pull/2735 to enable 802.1x for 
>> the secure network and this is working correctly. However, for the open 
>> guest SSID, I am trying to do a captive portal with dynamic vlan assignment. 
>> The user would initially be placed in the registration vlan (2) and then 
>> moved to another vlan based on their user role (vlan 4 or 10). Both the 
>> UniFi controller VM and the UniFi AP are in VLAN 20. On the UniFi 
>> controller, dynamic VLAN assignment appears to only be an option under 
>> 802.1x networks, otherwise you must choose a static VLAN. I saw the external 
>> captive portal setup for the UniFi under the PacketFence Network Devices 
>> documentation, but I don’t believe this supports dynamic VLAN assignment. 
>> Does anyone know of any way to do dynamic VLAN assignment on an open 
>> wireless network with the UniFi AP, or have any suggestions?
>> 
>> Thanks!
>> 
>> 
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> 
>> 
>> _______________________________________________
>> PacketFence-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
> 
> -- 
> Fabrice Durand
> [email protected] ::  +1.514.447.4918 (x135) ::  www.inverse.ca
> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence 
> (http://packetfence.org) 
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to