Hi everyone,
I have setup a packetfence server in lab environment with just one switch
from edge core 4610-54P running picos NOS from pica8 with 802.1X support.
I then connected a laptop running windows XP with the switch port but
getting "eap: No mutually acceptable types found"
I have installed the latest version of packetfence, password is plaintext
in packetfence configuration.
I've added the user to the users file as stated in installation guide.
Could this be a problem on laptop i'm connecting with the switch because
all else seems ok to me.
Below are radius messages
User-Name = "john" NAS-IP-Address = 0.0.0.0 NAS-Port-Type = Ethernet
NAS-Port = 20 Calling-Station-Id = "18:03:73:62:a6:a4" Framed-MTU = 1500
EAP-Message = 0x022600060304 State = 0x002471a8000268f765519fdccd0f8d3a
Message-Authenticator = 0x85702b6b9938fee0e421a2b53306356e
FreeRADIUS-Client-IP-Address = 10.10.51.169 Called-Station-Id =
"cc:37:ab:4f:b1:c1" Event-Timestamp = "7月 19 2018 13:45:43 CST"
Stripped-User-Name = "john" Realm = "null" EAP-Type = NAK Tmp-String-1 =
"18037362a6a4" Module-Failure-Message = "eap: No mutually acceptable types
found" User-Password = "******" SQL-User-Name = "john"
Would appreciate if someone could enlighten or point to a possible
solution, thanks.
Ali
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
