Greetings, All! We’re working on a pilot of PacketFence to replace a home-grown captive portal for two of the networks on our campus. Until we can migrate to VLAN enforcement, these two specific networks will be routed with PacketFence inline. There’s no NAT here – we’re using public address space. I believe we have everything configured properly, but traffic will not pass from a registered host on the inline network out to the internet. I’ve verified that the routing configuration (at the OS level, outside of PF) is correct – the devices behind PF can pass traffic just fine if I flush the iptables rules added by PF. I’ve also verified that the inline interface is not set to NAT in the web GUI. Is there anything else specific that I should check or that needs to be changed for this to work? We’re running 8.3.0 on CentOS 7 if that helps.
Thank you! --Ross Ross Lindsay | Systems/IT Architect Senior Office of Information Technology - Network Engineering Georgia Institute of Technology Phone: (404) 385-7520<tel:4043857520> | Skype: [email protected]<sip:[email protected]> Email: [email protected]<mailto:[email protected]>
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
