Nicolas,
my pf vm is connected on a router switch to the core switch that connects
cisco wlc in L2.
Registration Isolation
Vlan ID 220 221
Network 10.6.220.0/24 10.6.230.0/24
Gateway 10.6.220.1 10.6.230.1
DHCP 10.7.7.241 10.7.7.241
DNS 10.7.7.241
10.7.7.241
PF 10.7.7.241 10.7.7.241
#/conf/pf.conf
[interface eth0]
ip=10.7.74.241
type=management,portal
mask=255.255.255.0
[interface eth1.220]
enforcement=vlan
ip=10.6.222.5
type=internal
mask=255.255.255.0
[interface eth1.221]
enforcement=vlan
ip=10.6.223.5
type=internal
mask=255.255.255.0
#/conf/networks.conf
[10.6.222.0]
dns=10.6.222.5
split_network=disabled
dhcp_start=10.6.222.10
gateway=10.6.222.1
next_hop=10.6.224.1
domain-name=vlan-isolation.domain.com
nat_enabled=disabled
named=enabled
dhcp_max_lease_time=30
fake_mac_enabled=disabled
dhcpd=enabled
dhcp_end=10.6.222.246
type=vlan-registration
netmask=255.255.255.0
dhcp_default_lease_time=30
[10.6.223.0]
dns=10.6.223.5
split_network=disabled
dhcp_start=10.6.223.10
gateway=10.6.223.1
next_hop=10.6.223.1
domain-name=vlan-isolation.domain.com
nat_enabled=disabled
named=enabled
dhcp_max_lease_time=30
fake_mac_enabled=disabled
dhcpd=enabled
dhcp_end=10.6.223.246
type=vlan-isolation
netmask=255.255.255.0
dhcp_default_lease_time=30
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
0.0.0.0 10.7.74.1 0.0.0.0 UG 0 0 0 eth0
10.6.222.0 0.0.0.0 255.255.255.0 U 0 0 0
eth1.220
10.6.223.0 0.0.0.0 255.255.255.0 U 0 0 0
eth1.221
10.7.74.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.255.252 U 0 0 0
domain-b
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1
A terça, 20/08/2019, 16:13, Domingos Varela <[email protected]>
escreveu:
> Hi,
>
> The answer below
> Thanks
>
>
> A terça, 20/08/2019, 14:58, Nicolas Quiniou-Briand via PacketFence-users <
> [email protected]> escreveu:
>
>> Hello,
>>
>> 1. If I correctly understand you, you try to make a setup with routed
>> networks [0] ?
>>
> Yes, the vm is in a routed subnet
>
>>
>> 2. Before trying to configure routed networks, are you able to register
>> a device in the registration VLAN ?
>>
> No, the clients get the data vlan
>
>>
>> [0]
>>
>> https://packetfence.org/doc/PacketFence_Installation_Guide.html#_routed_networks
>> --
>> Nicolas Quiniou-Briand
>> [email protected] :: +1.514.447.4918 *140 :: https://inverse.ca
>> Inverse inc. :: Leaders behind SOGo (https://sogo.nu), PacketFence
>> (https://packetfence.org) and Fingerbank (http://fingerbank.org)
>>
>>
>> _______________________________________________
>> PacketFence-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
