Hello Benjamin,
it looks that this is what you need
https://github.com/inverse-inc/packetfence/pull/2034
it's in PacketFence since the version 7.0, can you try to enable
advanced.multihost and retry ?
Regards
Fabrice
Le 19-08-28 à 08 h 25, Shirley, Benjamin via PacketFence-users a écrit :
Hello everyone,
from reading up I am aware my setup is not officially supported, BUT
it works on our equipment with one caveat I would love to get some
information on.
We have a lot of offices equipped with workgroup switches connected to
(Aruba) HP 2920-48Gaccess switches. The access switch is able to
provide multiple vlans per port and separation of clients does work.
For example I can have 1 client on the workgroup switch being able to
access the registration vlan and another client accessing production
network, all controlled by mac authentication and the radius-reply by
Packetfence.
The problem is that in the situations where I have multiple vlans on
that one access switch port, Packetfence closes locationlog entries
for some of the nodes and no more switch port information is
available, thus reevaluating access or restarting of switch ports does
not work when changing role or deleting a node. If all clients on the
workgroup share the same role / vlan I can see the switchport details
and the before said access re-evalution works / the switchport
restarts when changing node role. (off course all clients loose
connectivity for the moment, but this is acceptable)
I would like to understand which procedure triggers this behavior and
if there is any chance that I can get this working?
Thanks in advance
Benjamin
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
