Hi, Thanks for all your responses but I have gone through the provided links prior to making this request.
A little bit of additional detail; - My SSID is Open and is a flex connect SSID to enable users to pick IP addresses from local DHCP servers - I have my access-lists in place - I have configured the controller on packet fence following the documentation - I have enabled the captive portal on the management interface - I have enabled self preregistration My challenges however are; - I cannot connect to the SSID. I keep getting an authentication error. - The captive portal does not show up - I cannot see the controller node online as it is recorded as offline on packetfence I would appreciate a clear step on what to do based off of successful implementations already done. The documentation has helped but I have not been successful. On Wed, 11 Nov 2020 at 20:14, Ludovic Zammit <lzam...@inverse.ca> wrote: > Hello, > > > https://packetfence.org/doc/PacketFence_Network_Devices_Configuration_Guide.html#_cisco_2 > > Thanks, > > > Ludovic zammitlzam...@inverse.ca :: +1.514.447.4918 (x145) :: www.inverse.ca > Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence > (http://packetfence.org) > > > > > > On Nov 10, 2020, at 8:24 AM, Ezeh Victor via PacketFence-users < > packetfence-users@lists.sourceforge.net> wrote: > > Hi, > > Please I need assistance with figuring how I can integrate PacketFence > with Cisco WLC. > > Any assistance will be appreciated. > > Regards. > _______________________________________________ > PacketFence-users mailing list > PacketFence-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/packetfence-users > > >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
