I donot have DHCP server installed, no provisioning for DHCP. It's all static ip.
On Fri, Feb 26, 2021, 22:21 Ludovic Zammit <[email protected]> wrote: > Does PF receives DHCP ACK from the production DHCP server ? > > Did you install the DHCP sensor ? > > > https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_microsoft_dhcp_sensor > > Thanks, > > > Ludovic Zammit > [email protected] :: +1.514.447.4918 (x145) :: www.inverse.ca > Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence > (http://packetfence.org) > > > > > > > > > On Feb 26, 2021, at 11:44 AM, NITISH AGGARWAL <[email protected]> > wrote: > > As such there is no restriction on when to check for provisioning although > I have selected option of checking after registration of device. > > On Fri, Feb 26, 2021, 22:11 Ludovic Zammit <[email protected]> wrote: > >> Provisioner workflow are triggered by DHCP traffic seen from the >> Production or Registration networks. >> >> When do you want to check if Symantec is installed ? >> >> Thanks, >> >> >> Ludovic Zammit >> [email protected] :: +1.514.447.4918 (x145) :: www.inverse.ca >> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence >> (http://packetfence.org) >> >> >> >> >> >> >> >> >> On Feb 26, 2021, at 11:40 AM, NITISH AGGARWAL <[email protected]> >> wrote: >> >> Yes....as I connects the device it went into registration vlan and then >> if it is in domain it gets authenticated and vlan changes as per switch. >> >> Dot1x is working fine...but problem is with Symantec. How to check if end >> device has Symantec client installed and working. >> >> On Fri, Feb 26, 2021, 22:07 Ludovic Zammit <[email protected]> wrote: >> >>> Hello, >>> >>> Your devices that connect on PF are statically IP addressed? >>> >>> Thanks, >>> >>> >>> Ludovic Zammit >>> [email protected] :: +1.514.447.4918 (x145) :: www.inverse.ca >>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence >>> (http://packetfence.org) >>> >>> >>> >>> >>> >>> >>> >>> >>> On Feb 25, 2021, at 9:55 AM, NITISH AGGARWAL via PacketFence-users < >>> [email protected]> wrote: >>> >>> Hi, >>> >>> I have setup PacketFence zen as per guide. I can see dot1x >>> authentication working with MSCHAPv2 auth, so non domain users are not >>> getting access, which is required. I am using auto-registration in >>> connection profile. >>> >>> Second, I have to check for Symantec in my endpoints. I have setup SEPM >>> provisioning as per document. During authentication, I can see security >>> event generated for provisioning on my node in PacketFence but my end >>> device got access to intranet no matter symantec installed on it or not. >>> >>> I have tried everything I could. I need some help in this case. I am >>> using static ips and cisco 2960. >>> >>> I need devices to be registered if they have both domain connected and >>> SEPM installed. >>> >>> Any help will be appreciated. Thanks in advance... >>> >>> >>> _______________________________________________ >>> PacketFence-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/packetfence-users >>> >>> >>> >> >
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
