Yes....as I connects the device it went into registration vlan and then if it is in domain it gets authenticated and vlan changes as per switch.
Dot1x is working fine...but problem is with Symantec. How to check if end device has Symantec client installed and working. On Fri, Feb 26, 2021, 22:07 Ludovic Zammit <[email protected]> wrote: > Hello, > > Your devices that connect on PF are statically IP addressed? > > Thanks, > > > Ludovic Zammit > [email protected] :: +1.514.447.4918 (x145) :: www.inverse.ca > Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence > (http://packetfence.org) > > > > > > > > > On Feb 25, 2021, at 9:55 AM, NITISH AGGARWAL via PacketFence-users < > [email protected]> wrote: > > Hi, > > I have setup PacketFence zen as per guide. I can see dot1x authentication > working with MSCHAPv2 auth, so non domain users are not getting access, > which is required. I am using auto-registration in connection profile. > > Second, I have to check for Symantec in my endpoints. I have setup SEPM > provisioning as per document. During authentication, I can see security > event generated for provisioning on my node in PacketFence but my end > device got access to intranet no matter symantec installed on it or not. > > I have tried everything I could. I need some help in this case. I am using > static ips and cisco 2960. > > I need devices to be registered if they have both domain connected and > SEPM installed. > > Any help will be appreciated. Thanks in advance... > > > _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users > > >
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
