Just upgraded to 12.2 (i was on 12.1) but when i try to save teh switch role configuration i obtain the following error messages:
"Unable to validate" "AccessListMapping.0.accesslist: ACLs not supported for switch" Any hint? Mirko Il giorno gio 16 mar 2023 alle ore 09:27 sgiops sgiops <thesgi...@gmail.com> ha scritto: > Hi all, > > i'm experiencing problems with DACL in my testing environment. I defined > the access list in Configuration -> Switches -> "my switch" -> Role mapping > by Access List. > The test access list mapped to the role is: > > deny tcp any 192.168.5.0 255.255.255.0 > permit ip any any > > The authentication and the role mapping work well, the switch port is > correctly moved to the right vlan but no access list is applied to that > port. > > the testing switch is a Cisco C1000-8T-2G-L witch the ios > version 15.2(7)E4. The device tracking is enabled by default and is is > working. > > The switch port is configured as following: > switchport mode access > authentication order dot1x mab > authentication priority dot1x mab > authentication port-control auto > authentication periodic > authentication timer reauthenticate 7200 > authentication timer restart 10800 > authentication violation replace > mab > no snmp trap link-status > dot1x pae authenticator > dot1x timeout quiet-period 2 > dot1x timeout tx-period 3 > > Could you please help me to trtoubleshoot and address this problem? > > Thanks > > Mirko > >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
