Hello, I was using the Standard Cisco switch (template based).
Mirko Il giorno gio 16 mar 2023 alle ore 15:20 sgiops sgiops <thesgi...@gmail.com> ha scritto: > Hello Fabrice, > > with the Catalyst_2960 user does not authenticate anymore: > From the auditing page i can grab this messages: > > Module-Failure-Message = "rest: Request failed: 28 - Timeout was reached" > Module-Failure-Message = "rest: Server returned no data" > > > > Il giorno gio 16 mar 2023 alle ore 14:56 Fabrice Durand via > PacketFence-users <packetfence-users@lists.sourceforge.net> ha scritto: > >> Hello Mirko, >> >> what switch module are you using in PacketFence for this switch ? >> Can you try the Catalyst_2960 ? >> >> Regards >> Fabrice >> >> >> Le jeu. 16 mars 2023 à 09:02, sgiops sgiops via PacketFence-users < >> packetfence-users@lists.sourceforge.net> a écrit : >> >>> Just upgraded to 12.2 (i was on 12.1) but when i try to save teh switch >>> role configuration i obtain the following error messages: >>> >>> "Unable to validate" >>> "AccessListMapping.0.accesslist: ACLs not supported for switch" >>> >>> Any hint? >>> >>> Mirko >>> >>> >>> >>> Il giorno gio 16 mar 2023 alle ore 09:27 sgiops sgiops < >>> thesgi...@gmail.com> ha scritto: >>> >>>> Hi all, >>>> >>>> i'm experiencing problems with DACL in my testing environment. I >>>> defined the access list in Configuration -> Switches -> "my switch" -> Role >>>> mapping by Access List. >>>> The test access list mapped to the role is: >>>> >>>> deny tcp any 192.168.5.0 255.255.255.0 >>>> permit ip any any >>>> >>>> The authentication and the role mapping work well, the switch port is >>>> correctly moved to the right vlan but no access list is applied to that >>>> port. >>>> >>>> the testing switch is a Cisco C1000-8T-2G-L witch the ios >>>> version 15.2(7)E4. The device tracking is enabled by default and is is >>>> working. >>>> >>>> The switch port is configured as following: >>>> switchport mode access >>>> authentication order dot1x mab >>>> authentication priority dot1x mab >>>> authentication port-control auto >>>> authentication periodic >>>> authentication timer reauthenticate 7200 >>>> authentication timer restart 10800 >>>> authentication violation replace >>>> mab >>>> no snmp trap link-status >>>> dot1x pae authenticator >>>> dot1x timeout quiet-period 2 >>>> dot1x timeout tx-period 3 >>>> >>>> Could you please help me to trtoubleshoot and address this problem? >>>> >>>> Thanks >>>> >>>> Mirko >>>> >>>> _______________________________________________ >>> PacketFence-users mailing list >>> PacketFence-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/packetfence-users >>> >> _______________________________________________ >> PacketFence-users mailing list >> PacketFence-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/packetfence-users >> >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
