Marco, From what I’ve seen packet fence is used with a router in front of it, it usually does not replace a router/firewall.
If you don’t have a DHCP server you would need to set a static IP address https://wiki.debian.org/NetworkConfiguration > On May 6, 2024, at 9:53 AM, Laboratorio Tronic via PacketFence-users > <packetfence-users@lists.sourceforge.net> wrote: > > Hello everyone, > I'm posting again because my previous thread went kinda dispersive. > I'm trying to setup Packetfence on a dedicated machine, which now is running > pfSense (Hyper-V VM), but since I'm having troubles installing it on > bare-metal, I want to go Hyper-V with PacketFence as well so that I can > always switch back to pfSense in case of troubles. > The machine that will host it is: > -AMD Ryzen 5 3600 (6 cores/12 threads, 3,6GHz) > -32GB DDR4 3200Mhz > -ASUS TUF GAMING B450M-PLUS II with one integrated Realtek Gigabit NIC and > one Intel(R) PRO/1000 PT Dual Port double NIC via PCI-eX > -Sata SSD > -OS Windows 11 Pro with Hyper-V enabled and running > > Both installations of version 13.0 and 13.1 (but I tried earlier versions as > well) do not even start installing: I'm shown the Debian wallpaper but no > boot/setup options..meanwhile on Virtualbox I get the menu but once install > finishes I'm shown no ip for the webconfigurator, no matter how many NICs I > enable or how I configure them. > Has anyone a virtual disk with Packetfence already configured, so that I can > mod from there? > I seem to be completely unable to install. > > Marco > > > _______________________________________________ > PacketFence-users mailing list > PacketFence-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/packetfence-users _______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
