Hi Anthony Thanks a lot for you support. Sorry but I don't use WLC. I'm using the packetfence with switchs, the model of the switch for test is cisco C3560CX-12PC-S.
Thanks a lot Roberto -----Messaggio originale----- Da: Ravenhill, Anthony P. via PacketFence-users <[email protected]> Inviato: lunedì 13 ottobre 2025 10:56 A: [email protected] Cc: Ravenhill, Anthony P. <[email protected]> Oggetto: Re: [PacketFence-users] packetfence 14.1.0 - after authentication, the client dosen't take the correct ip address Attenzione: Questa mail proviene dall’esterno della nostra organizzazione. Non fare click su link e non aprire allegati se non conosci il mittente e non sai se il contenuto è sicuro. Warning: This email originated from outside our organization. Do not click on any links or open any attachments unless you know the sender and are sure that the content is safe. It is possible that your WLC is not sending a CoA-ACK in response to PacketFence’s CoA-Request. If so, check your WLC. When you added PacketFence as an AAA or RADIUS server you may not have enabled CoA (RFC 3576) for it. Ant On Oct 11, 2025, at 10:00 AM, Casagrande Roberto via PacketFence-users <[email protected]> wrote: Hello, I have this situation after the client insert the credential, the packetfence change the ports of the switch in the correct vlan but after load the page, the client has the same ip address. For renegotiate the ip address, I have to unplug and plug the cable or type ipconfig release and renew. _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
