Hi Dave.
This happens sometimes during upgrading R4 projects to R5; the pref panel
information for the PalmRez pref panel (formerly Pilotrez) is lost during
upgrading. You can work around this problem by entering the information
manually into the PalmRez pref panel in the project settings. In the Input
files->Mac Resource files, enter the name of the .tmp file from the 68K
target pref panel. For information on the other settings you could take a
look at the project stationeries (create a new project from File->New
Project) to see how they are set up. Also the 'Targeting Palm OS' docs in
the CodeWarrior Documentation has some information on the pref panel.
Hope this helps.
Rgds,
JK Lam
Metrowerks Technical Support
----- Original Message -----
From: Dave King <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, May 04, 1999 10:28 AM
Subject: Code Warrior R5 Linking Problem
> Hi,
>
> I've inherited a project that was done in CWR4 and I'm trying to build in
> CWR5 and I get the following error
>
> Link Error : No input file for PalmRez. Check project settings.
>
> unfortunately it's not clear to me what the projects setting should be set
> to. I admit to being a total palm newbie. Any help would be appreciated.
> If there's a forum dedicated to just CW issues I'd a appreciate a pointer
to
> that forum.
>
> -Peace
> Dave
>
