I have found that closing the Log window for the emulator will sometimes
allow me to start up another debug session. But then sometimes, it just
seems to be a timing issue, where if I wait long enough after the end of my
previous debug session, I can reload and debug my application.
I do have pretty good luck using the emulator and I'd say it works more than
85% of the time for multiple debug sessions, though once in a while, I will
have to close down the whole IDE to get things going again.
__________________________
Kevin O'Keefe
The Windward Group
TEL: (408) 399-8577
FAX: (408) 395-9642
mailto:[EMAIL PROTECTED]
__________________________
> -----Original Message-----
> From: Dave Lippincott [mailto:[EMAIL PROTECTED]]
> Sent: Monday, April 26, 1999 6:29 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Transport timeout error POSE<->Window CW
>
>
> Its a known bug. I've tried tapping the graffiti area,
> buttons, restarting
> POSE, giving POSE focus during downloads, disabling the
> TCP/IP in POSE and
> the IDE... Best fix I've found so far is to exit the CW IDE
> and POSE after
> debugging your app.
>
>
> -----Original Message-----
> From: Neil Rhodes <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Saturday, April 24, 1999 7:42 PM
> Subject: Transport timeout error POSE<->Window CW
>
>
> >I'll often get a "Transport timeout error" when trying to download my
> >application from Windows CodeWarrior to POSE. To fix it,
> I've got to quit
> >POSE and CW and restart them both.
> >
> >This happens about 50% of the time.
> >
> >I'm using CodeWarrior Release 5 with Update 1, and POSE
> 2.1d26 on Windows
> >95.
> >
> >Anyone else have these problems (or, even better, a fix or
> workaround)?
> >
> >
> >Neil Rhodes
> >
> >
>
>
>
