hi Bart,
SerControl(SerialRef, serCtlIrDADisable, 0, 0);
this is the reverse of
SerControl( serRef, serCtlIrDAEnable, 0, 0 ).
E r i c ���_
Electrical and Electronic Engineering
The Hong Kong University of Science and Technology
URL: http://home.ust.hk/~ee_slm
On Fri, 25 Jun 1999, Thompson, Bart wrote:
> Thanks for the reply Eric-
> Unfortunately using the SerControl( serRef, serCtlIrDAEnable, 0, 0 ) call
> does not seem to work. It appears to stay connected to the serial port
> rather than switching to the IR port.
> I am using the IrComm enhancement from 3Com's site. After installing this
> package there is a new preference setting available that allows selection of
> "serial/IR". When I set the preferences to IR all my standard serial comm
> goes thru the IRCOMM layers and is transmitted to (in this instance) a
> printer.
> The problem is that I cannot leave the is setting or hotsynch will not
> function on the cradle. It has to be reset to "serial via cradle" on the
> preferences for normal hotsynch. This is what I need to programmatically
> control - the redirection to IR during my program's execution.
>
> Thanks in advance for any help..
>
> ----------------------------------------------
> Bart Thompson
> Senior Software Engineer
> Client Development
> USCS International
> 916.939.6132
> [from my 95 box]
> ----------------------------------
>
>
