I am also trying to get the Network Hotsync program installed and working.
While I still haven't managed to hotsync the POSE useing the Network
Hotsync, I can tell you this: if you tried installing nhssetup.exe and you
have Palm Desktop 3.0.1 installed on your machine, it didn't work. Was the
README.TXT at the end of the install blank? You need to uninstall PD3.0.1
and install (temporarily) PD3.0 (which is still available from palm.com).
This will at least install the Network Hotsync on your computer and put
netsync.prc on your PC for you to install on the palm pilot.
Hope this helps,
David
----- Original Message -----
From: Maha Sharabinth <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 27, 1999 23:56
Subject: Problems with Network Hotsync Setup
> I am having problems with setting up the Network Hotsync option.
>
> I have downloaded the Network Hotsync option software (nhssetup.exe) from
> the 3Com site and installed it on Hotsync Manager Desktop 3.0.2 According
> to the instruction I did a local sync to my primary PC to make my device
> ready for a network hotsync.
>
> How do I know that the Network Hotsync option is installed in the device ?
> After the local sync, I have checked the device's HotSync application,
which
> still shows two options (Local Hotsync & Modem Hotsysnc). Also the
standard
> 2 menu options (Conduit Setup, Modem Setup) are available for this
> application. I am pretty sure that the network hotsync option is not
> installed properly with the Network Hotsync Manager software. Are there
any
> bug with that software ? Am I missing anything ?
>
> How to inform the device to perform a Network Hotsync ?
>
> Even to do a Modem Hotsync, I assume that we need to establish a Modem
> connection to the server (like RAS connection) then we need to inform the
> device to do a Network Hotsync. To do that, how to inform the device ?
>
> Any help on this topic will be appreciated.
>
> Cheers
> Maha
>
>
>
