You may want to use the latest version of Lite from
www.metrowerks.com/pda/palm. The R6 version of Lite does not have the same
limitation as the R5 version. The main limitation of R6 Lite is that the
runtime is set up to display a notice that your app was created using Lite
whenever you run it. Beyond that, it should allow you to do what you need.
Jun-Kiat Lam
Metrowerks Technical Support
----- Original Message -----
From: Gaurav Palvia <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 12, 1999 11:55 AM
Subject: Re: problem in the size of the segment.
> thanx Eric
> i m using the CW 5 lite version.so u say its got 16k limit.thats fine
> but how many number of segments it can support.
> as whenevr i create the 3rd segment it gives me error saying
> that lite version doesn;t support more then 2 seg.
> so is there no way i can use my 55k code.
>
>
> -----Original Message-----
> From: Eric Cloninger <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Friday, November 12, 1999 9:35 PM
> Subject: RE: problem in the size of the segment.
>
>
> >If you are using the Lite version of the tools, which is what that
message
> >indicates, then there is a 16K limit on the size of the segment. The
> >commercial tools will let you create segments up to the normal limit,
which
> >is 64K (more or less, you're mileage may vary).
> >
> >If you have the commercial tools, then it looks like you may have the
Lite
> >version of the post linker somehow. Did you start out with the Lite
tools
> >and upgrade to the commercial tools?
> >
> >-E
> >
> >> -----Original Message-----
> >> From: Gaurav Palvia [mailto:[EMAIL PROTECTED]]
> >> Sent: Friday, November 12, 1999 5:21 AM
> >> To: palm-dev-forum
> >> Subject: problem in the size of the segment.
> >>
> >>
> >> how much code & data can reside in a single segment.
> >> i have read that it is 32k but i have created two segments.
> >> for my app and it si giving me the linker error that "
> >> ouput size limitation exceeded for evaluation license in resource
code#1
> >>
> >> i have a total of 55k code and approx 4k of data which
> >> i have arranged as foloows
> >> code
> >> data
> >> precompiled headers 27k 667
> >> segment2 27k 3k
> >>
> >> every time it is giving me the above error for either resource code#1
> >> or resource code#2.
> >>
> >> i have tried many combinations by shuffling the files in these 2
segments
> >> but nothing seem to work. i have also tried to create one more
> >> segment for
> >> which it says that evaluation version doesn't support
> >> 3rd segment..please help me.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
>
>
