I starting to look like that what has to be done. I just wanted to avoid
rewriting the app using the new serial manager (for now). I was hoping for
a quick way to start debugging today. Still cant use POSER to debug. BTW:
anyone know any tricks to get the serial routines to return something other
than 0 when executing on POSER? SerReceiveCheck and SerReceive always
return 0 on POSER but work flawlessly on the device.
>Hack a connecter that can go from the CF serial card to your hardware, and
then use the "regular" serial port for debugging.
No hacking required. Already had a cable for the card when it was used to
develop <gulp> the CE version.
-----Original Message-----
From: Brian Hall <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Friday, January 07, 2000 4:32 AM
Subject: Re: Debug with CF Serial
>>>2) any suggestions on how I can debug through a CF serial card so I can
test
>>>hardware on the regular serial port...
>
>How about going the other way? Hack a connecter that can go from the CF
>serial card to your hardware, and then use the "regular" serial port for
>debugging. (How hard it is to make that connector depends on the device,
>but worst case you could always use the bottom inch or so of a trashed
>Pilot 1000 ;-)
>
>This also gives you an excuse to rev your app to be able to address OS 3.3
>serial ports.
>
>Brian
>_____________________________________________________________________
>Mark/Space Softworks voice 408-293-7299
>111 West Saint John, 3rd Floor fax 408-293-7298
>San Jose, CA 95113 <http://www.markspace.com>
>
> PalmOS, Mac OS, Windows and Web Software & Solutions:
>
> PageNOW! Wireless Messaging, PhoneWatcher Caller ID,
> Online & Communicate terminal emulation and serial debugging
>
