I was having no luck with POSER communicating with my hardware until 3.0d4
Now it seems to work(mostly). The biggest difference may be NT (since I'm
using 98). You also may want to use a NULL modem cable at least on the NT
side. I've seen several instances where this helped the PC's UART.
Keith may be able to lend some other insights.
-----Original Message-----
From: David Slotter <[EMAIL PROTECTED]>
To: Palm Developer Forum <[EMAIL PROTECTED]>
Date: Wednesday, February 16, 2000 2:43 PM
Subject: Serial Works In POSE But Not Device?
>Hi. I have some serial port code which works under POSE 3.0a4 but not on
the
>actual device (Palm VII). This appears to be the opposite problem of what
>others have experienced on this list (code works on the device but not
>POSE).
>
>More specifically, receiving data does not work. I am using the Serial
>Manager available under PalmOS 3.2.x. There is no problem with
>opening/closing the serial port on a Palm VII that I'm testing with, but
>nothing appears to be received. I have configured the port to (both 2400
and
>4800 baud) 8N1 with no handshaking since the only RS-232 lines coming off
my
>serial device are send/receive/ground.
>
>And yes, I tried a terminal emulator on the real device to make sure that
>it's seeing the data. (I used the "Online" application from Mark/Space).
>
>POSE is running under Windows NT, but I will be trying it out under MacOS
>8.6 as well shortly. Does anyone have any thoughts? I searched the list
>archives for this list and did not see anyone posting about the same
problem
>I'm having and also searching the Knowledge base doesn't give any help
>(except for some very old sample code).
>
>Thanks.
>
>-Dave Slotter
>
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palm.com/devzone/mailinglists.html
