Here are the APIs to acquire the device MAC and info on all devices within range. Extracted from Incs/68k/libraries/network/PalmNetServices.h:
/** * Gets the HW address (i.e. MAC address) for the interface * * @param libRefNum: IN: Reference number of the library. * @param hwAddrP: OUT: Pointer to store MAC address in. * Must be 6 bytes in length. * * @retval Err Error code. */ Err NetServicesGetHWAddr( UInt16 libRefNum, UInt8 *hwAddrP ) SYS_TRAP(NetServicesLibTrapGetHWAddr); /** * Inititate a BSS scan. * The scan completes by broadcasting a notification of * type WIFI_SCAN_COMPLETE_EVENT. * * @param libRefNum: IN: Reference number of the library. * * @retval Err Error code. */ Err NetServicesStartScan( UInt16 libRefNum ) SYS_TRAP(NetServicesLibTrapStartScan); [Jeff Loucks] On 3/8/07, luis maldonado <[EMAIL PROTECTED]> wrote: > > I just > > 1) downloaded the netservices documentation from the pdn > 2) reviewed the Palm overview > 3) reviewed the data communications sections > paying particular attention to the master library > the http library and the html libraries > 4) I also looked at the telephone sections with GSM and related material > 5) I also read all of the 16 lines describing the net services API. and > the > sections above it > which mentions the use of the palmwificommon.h file > > Unfortunately I did not see anything about how to get the MAC address > using > any of the > libraries mentioned above. > > Sorry if I'm being so obtuse, but if any body can point me in the right > direction where I can find a bit of sample code I'd really be very > appreciative.... > > Thanks again > > Luis > > -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
