You can bypass the RS232 transceiver with a small Phillips screwdriver and a
soldering iron...
FWIW, you might get more helpful answers if you would explain what it is you
are trying to accomplish. IE, what UART behavior you are trying to
circumvent and why...
-jjf
-----Original Message-----
From: Patrick Ouellet [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 24, 2000 9:46 AM
To: Palm Developer Forum
Subject: Re: Raw Data on Serial
Is there any way to bypass the RS232....
Is it possible to send data to Rx without the UART.
Dave Lippincott wrote:
> Tx and CTS are input lines so you're not going to be able send anything on
> them. DTR is hardwired to the RS232 transceiver so you can't control that
> either.
> I don't know if it possible to send data on Rx via a hardware UART without
> some kind of baud rate. You can already adjust the handshaking. Parity is
> either even, odd or none anyway.
> What do you need to do that doesn't work via the SDK?
--
For information on using the Palm Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
