Yes, that's true, but sometimes when I would build them in Paint,
I'd have a row or two of pixels extra, but wouldn't notice. I'd
go to copy it into the Constructor editor, THEN I'd notice it, so
I'd just change the x or y of the bitmap size by a pixel or so,
and then the problems would start. That's one of the few problems
I've encountered where the "can't save" error would occur, besides
copying resources over from projects built in other versions, and
when you build a form, install a bitmap on it, remove the bitmap
from the project, then go to open the form. I've figured out
workarounds on my own, though...so I share. =)
-Rus
>-----Original Message-----
>From: Heather Tufts [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, July 27, 2000 9:49 AM
>To: Palm Developer Forum
>Subject: RE: Constructor can't save resource
>
>
>
>> >I've had problems with some bitmaps, too, especially big
>> ones that fill
>> >up about half of the screen. If I edit it in Paint, change
>> it to black
>> >and white, copy it into a bitmap edit window in
>Constructor, then try
>> >to mess with it (change the bitmap size or something),
>> Constructor will
>> >crash almost every time. After I lost my work once or
>twice, I wised
>> >up and saved everything before I began doing such operations.
>
>I think it tends to work better if you set the image size
>first and then
>paste in the bitmap.
>-hkmlt
>
>--
>For information on using the Palm Developer Forums, or to
>unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/
>
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
