Well, yes, but on 3.0a7! I was about to write in this morning about it. Nine times
out of ten when I try to run I get the 'Failed to connect to remote' message. The log
window shows:
CmdReadRemoteMem: error in SlkReceivePacket =
Serial Link timeout.
Trying to Read address 0x0
Sometimes it won't connect at all, I have to exit the emulator and re-start it and it
*seems* a little better, but still *very* flaky. This is a huge waste of time, and
has brought my development to a crawl.
Also, the 'Debug' button in the 'PalmOS Emulator' crashed dialog *never* works. It
usually just re-draws the same dialog box.
I'm running Win98, CW6 with update 1 and Pose 3.0a7 on a 150Mhz Pentium II. I just
ordered a 750Mhz machine, thinking the 'slow' processor might be part of the problem.
At least it should speed up the constant re-loads.
Bill
Chris DiPierro wrote:
> ----------------------------------------------------------------------
>
> Subject: POSE 3.0a8
> From: "Chris DiPierro" <[EMAIL PROTECTED]>
> Date: Tue, 19 Dec 2000 11:40:30 -0500
> X-Message-Number: 34
>
> Is anyone else having some problems with the new POSE? When I debug from CW,
> I'm getting an inordinate number of Transport TimeOut Errors. I got the
> occasional one on 3.0a7, but on 3.0a8 I get it usually twice in a row before
> it'll finally let me debug the time after.
>
> Anyone else having the same issue?
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
